EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A BIM-Based Digital Twin Framework for Urban Roads: Integrating MMS and Municipal Geospatial Data for AI-Ready Urban Infrastructure Management

Vittorio Scolamiero iD, Piero Boccardo iD

Sensors · 02.02.2026 · 26 (3) · 947

DOI: 10.3390/s26030947 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 02.02.2026. Verfasst von Vittorio Scolamiero und 1 weiteren Autor:innen. Beteiligte Einrichtung: Department of Civil, Building and Environmental Engineering (DICEA), Sapienza Università di Roma, Via Eudossiana, 18, 00184 Rome, Italy. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 66 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: European Union NextGenerationEU, Ministerial Decree.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Digital twins (DTs) are increasingly adopted to enhance the monitoring, management, and planning of urban infrastructure. While DT development for buildings is well established, applications to urban road networks remain limited, particularly in integrating heterogeneous geospatial datasets into semantically rich, multi-scale representations. This study presents a methodology for developing a BIM-based DT of urban roads by integrating geospatial data from Mobile Mapping System (MMS) surveys with semantic information from municipal geodatabases. The approach follows a multi-modal (point clouds, imagery, vector data), multi-scale and multi-level framework, where ‘multi-level’ refers to modeling at different scopes—from a city-wide level, offering a generalized representation of the entire road network, to asset-level detail, capturing parametric BIM elements for individual road segments or specific components such as road sign and road marker, lamp posts and traffic light. MMS-derived LiDAR point clouds allow accurate 3D reconstruction of road surfaces, curbs, and ancillary infrastructure, while municipal geodatabases enrich the model with thematic layers including pavement condition, road classification, and street furniture. The resulting DT framework supports multi-scale visualization, asset management, and predictive maintenance. By combining geometric precision with semantic richness, the proposed methodology delivers an interoperable and scalable framework for sustainable urban road management, providing a foundation for AI-ready applications such as automated defect detection, traffic simulation, and predictive maintenance planning. The resulting DT achieved a geometric accuracy of ±3 cm and integrated more than 45 km of urban road network, enabling multi-scale analyses and AI-ready data fusion.

Schlagwörter

Stichwörter der Autor:innen

BIMLiDARMMSdigital twinroad asset managementurban mappingurban road network

Autor:innen und Institutionen

  • Department of Civil, Building and Environmental Engineering (DICEA), Sapienza Università di Roma, Via Eudossiana, 18, 00184 Rome, Italy.
  • Interuniversity Department of Regional and Urban Studies and Planning (DIST), Polytechnic of Torino, Viale Pier Andrea Mattioli, 39, 10125 Torino, Italy.

ORCID-Profile: Vittorio Scolamiero, Piero Boccardo

Förderung

  • European Union NextGenerationEU
  • Ministerial Decree

Zitieren

APA

Scolamiero, V., & Boccardo, P. (2026). A BIM-Based Digital Twin Framework for Urban Roads: Integrating MMS and Municipal Geospatial Data for AI-Ready Urban Infrastructure Management. Sensors, 26(3), 947. https://doi.org/10.3390/s26030947

Vancouver

Scolamiero V, Boccardo P. A BIM-Based Digital Twin Framework for Urban Roads: Integrating MMS and Municipal Geospatial Data for AI-Ready Urban Infrastructure Management. Sensors. 2026;26(3):947. doi:10.3390/s26030947

BibTeX
@article{Scolamiero2026,
  author = {Scolamiero, Vittorio and Boccardo, Piero},
  title = {A BIM-Based Digital Twin Framework for Urban Roads: Integrating MMS and Municipal Geospatial Data for AI-Ready Urban Infrastructure Management},
  journal = {Sensors},
  year = {2026},
  volume = {26},
  number = {3},
  pages = {947},
  doi = {10.3390/s26030947}
}
Kostenlos starten →