EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

GPIS-Based Calibration for Non-Overlapping Dual-LiDAR Systems Using a 2.5D Calibration Framework

Huan Yu iD, Xiaohong Zhang, Ming Li, Desheng Zhuo iD, Pin Zhang, Man Li, Yuanyuan Shi

Sensors · 25.01.2026 · 26 (3) · 800

DOI: 10.3390/s26030800 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 25.01.2026. Verfasst von Huan Yu und 6 weiteren Autor:innen. Beteiligte Einrichtung: School of Geodesy and Geomatics, Wuhan University, Wuhan 430079, China. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 44 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Dual-LiDAR systems are widely deployed in autonomous driving, yet extrinsic calibration remains challenging in non-overlapping field-of-view (FoV) configurations where correspondence-based methods are unreliable. We propose an engineering-oriented 2.5D calibration framework that estimates horizontal extrinsics (x,y,yaw) via motion-guided planar alignment and then refines them using Gaussian Process Implicit Surfaces (GPIS), which provide continuous and probabilistic surface constraints from spatially disjoint scans. This design avoids calibration targets and reduces dependence on strong scene assumptions, improving robustness under noise and weak structure. Extensive high-fidelity simulation experiments demonstrate centimeter-level lateral accuracy and sub-degree yaw error, consistently outperforming representative motion-based and BEV-based baselines under both clean and noisy settings. To further assess real-world applicability, we conduct a preliminary nuScenes case study by splitting LiDAR scans into front and rear subsets to emulate a non-overlapping dual-LiDAR setup, achieving improved yaw accuracy and competitive lateral precision. Overall, the proposed method serves as a practical refinement stage for non-overlapping dual-LiDAR calibration, with a favorable balance of accuracy, robustness, and engineering feasibility.

Schlagwörter

Stichwörter der Autor:innen

GPISautonomous drivingdual-LiDAR systemsextrinsic calibrationnon-overlapping field of viewsurface modeling

Autor:innen und Institutionen

  • School of Geodesy and Geomatics, Wuhan University, Wuhan 430079, China.
  • Chinese Antarctic Center of Surveying and Mapping, Wuhan University, Wuhan 430079, China.
  • Hubei Luojia Laboratory, Wuhan 430079, China.
  • School of Artificial Intelligence, Wuhan University, Wuhan 430072, China.
  • School of Computer Science, Wuhan University, Wuhan 430079, China.
  • Dongfeng Motor Corporation Technical Center, Wuhan 430010, China.

ORCID-Profile: Huan Yu, Desheng Zhuo

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Yu, H., Zhang, X., Li, M., Zhuo, D., Zhang, P., Li, M., & Shi, Y. (2026). GPIS-Based Calibration for Non-Overlapping Dual-LiDAR Systems Using a 2.5D Calibration Framework. Sensors, 26(3), 800. https://doi.org/10.3390/s26030800

Vancouver

Yu H, Zhang X, Li M, Zhuo D, Zhang P, Li M, et al. GPIS-Based Calibration for Non-Overlapping Dual-LiDAR Systems Using a 2.5D Calibration Framework. Sensors. 2026;26(3):800. doi:10.3390/s26030800

BibTeX
@article{Yu2026,
  author = {Yu, Huan and Zhang, Xiaohong and Li, Ming and Zhuo, Desheng and Zhang, Pin and Li, Man and Shi, Yuanyuan},
  title = {GPIS-Based Calibration for Non-Overlapping Dual-LiDAR Systems Using a 2.5D Calibration Framework},
  journal = {Sensors},
  year = {2026},
  volume = {26},
  number = {3},
  pages = {800},
  doi = {10.3390/s26030800}
}
Kostenlos starten →