EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Adaptive Filtering Method for Dynamic BOTDA Sensing Based on a Closed-Circuit Configuration

Leonardo Rossi iD, Gabriele Bolognini iD

Sensors · 24.01.2026 · 26 (3) · 789

DOI: 10.3390/s26030789 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 24.01.2026. Verfasst von Leonardo Rossi und 1 weiteren Autor:innen. Beteiligte Einrichtung: Consiglio Nazionale delle Ricerche, 40129 Bologna, Italy. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 23 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

A dynamic filtering system that can choose in real time between two different noise filters depending on the dynamics of the measured environment is presented. Unlike other adaptive filters approaches, this system does not require prior knowledge of the environment beyond noise characteristics. We implemented this system into a Brillouin optical time-domain analysis (BOTDA) sensing scheme using a closed-circuit control system for dynamic tracking of the Brillouin Frequency Shift (BFS) along the sensing fiber using a Proportional-Integral-Derivative (PID) controller. Through experiments and numerical simulations, we compare this method to the filtering capabilities of P and PI controllers chosen as optimal in a previous work for closed-circuit BOTDA (CC-BOTDA). Results show that the adaptive noise filter provides a dynamic response comparable to the other controllers, while increasing noise suppression by a factor between 30% and beyond 100%, showing how an adaptive system can improve suppression with only knowledge of the measurement noise.

Schlagwörter

Stichwörter der Autor:innen

Brillouin ScatteringBrillouin optical time domain analysisdistributed optical fiber sensorsdynamic temperature measurementoptical fiber sensorsstrain and temperature measurement

Autor:innen und Institutionen

  • Consiglio Nazionale delle Ricerche, 40129 Bologna, Italy.

ORCID-Profile: Leonardo Rossi, Gabriele Bolognini

Zitieren

APA

Rossi, L., & Bolognini, G. (2026). Adaptive Filtering Method for Dynamic BOTDA Sensing Based on a Closed-Circuit Configuration. Sensors, 26(3), 789. https://doi.org/10.3390/s26030789

Vancouver

Rossi L, Bolognini G. Adaptive Filtering Method for Dynamic BOTDA Sensing Based on a Closed-Circuit Configuration. Sensors. 2026;26(3):789. doi:10.3390/s26030789

BibTeX
@article{Rossi2026,
  author = {Rossi, Leonardo and Bolognini, Gabriele},
  title = {Adaptive Filtering Method for Dynamic BOTDA Sensing Based on a Closed-Circuit Configuration},
  journal = {Sensors},
  year = {2026},
  volume = {26},
  number = {3},
  pages = {789},
  doi = {10.3390/s26030789}
}
Kostenlos starten →