Machine Learning-Powered Vision for Robotic Inspection in Manufacturing: A Review
Sensors · 24.01.2026 · 26 (3) · 788
DOI: 10.3390/s26030788 ↗Kurz gefasst
Übersichtsarbeit in der Zeitschrift Sensors, online erschienen am 24.01.2026. Verfasst von David Yevgeniy Patrashko und 1 weiteren Autor:innen. Beteiligte Einrichtung: Robotics Process Development Laboratory (RPDL), Georgia Southern University, Statesboro, GA 30458, USA. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 75 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Georgia Southern University.
Abstract (Originalsprache)
Machine learning (ML)-powered vision for robotic inspection has accelerated with smart manufacturing, enabling automated defect detection and classification and real-time process optimization. This review provides insight into the current landscape and state-of-the-art practices in smart manufacturing quality control (QC). More than 50 studies spanning across automotive, aerospace, assembly, and general manufacturing sectors demonstrate that ML-powered vision is technically viable for robotic inspection in manufacturing. The accuracy of defect detection and classification frequently exceeds 95%, with some vision systems achieving 98–100% accuracy in controlled environments. The vision systems use predominantly self-designed convolutional neural network (CNN) architectures, YOLO variants, or traditional ML vision models. However, 77% of implementations remain at the prototype or pilot scale, revealing systematic deployment barriers. A discussion is provided to address the specifics of the vision systems and the challenges that these technologies continue to face. Finally, recommendations for future directions in ML-powered vision for robotic inspection in manufacturing are provided.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Robotics Process Development Laboratory (RPDL), Georgia Southern University, Statesboro, GA 30458, USA.
ORCID-Profile: Vladimir Gurau
Förderung
- Georgia Southern University
Zitieren
APA
Patrashko, D. Y., & Gurau, V. (2026). Machine Learning-Powered Vision for Robotic Inspection in Manufacturing: A Review. Sensors, 26(3), 788. https://doi.org/10.3390/s26030788
Vancouver
Patrashko DY, Gurau V. Machine Learning-Powered Vision for Robotic Inspection in Manufacturing: A Review. Sensors. 2026;26(3):788. doi:10.3390/s26030788
BibTeX
@article{Patrashko2026,
author = {Patrashko, David Yevgeniy and Gurau, Vladimir},
title = {Machine Learning-Powered Vision for Robotic Inspection in Manufacturing: A Review},
journal = {Sensors},
year = {2026},
volume = {26},
number = {3},
pages = {788},
doi = {10.3390/s26030788}
}
EUVIMED