EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Development and Experimental Validation of a Physics-Based Digital Twin for Railway Freight Wagon Monitoring

Alessio Cascino iD, Leandro Nencioni, Laurens Lanzillo iD, Francesco Mazzeo iD, Salvatore Strano iD, Mario Terzo, Simone Delle Monache, Enrico Meli iD

Sensors · 18.01.2026 · 26 (2) · 643

DOI: 10.3390/s26020643 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 18.01.2026. Verfasst von Alessio Cascino und 7 weiteren Autor:innen. Beteiligte Einrichtung: Department of Industrial Engineering, University of Florence, 50139 Florence, Italy. Die Arbeit wurde bisher 16-mal zitiert (Crossref) und nennt 38 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: MOST—Sustainable Mobility National Research Center, European Union Next-GenerationEU.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The development of digital twins for railway freight vehicles represents a key step toward more efficient, data-driven maintenance and safety assessment. This study focuses on the creation of a digital twin of the T3000 articulated freight wagon, one of the most widespread intermodal transport solutions in Europe. Despite its relevance, the dynamic behavior of this vehicle type has been scarcely investigated so far in scientific literature. A dedicated onboard measurement layout was defined to enable comprehensive monitoring of vehicle dynamics and the interactions between adjacent wagons within the train. The experimental setup integrates inertial sensors and a 3D vision system, allowing for detailed analysis of both rigid-body and vibrational responses under real operating conditions. A high-fidelity multibody model of the articulated wagon was developed and tuned using the acquired data, achieving optimal agreement with experimental measurements in both straight and curved track segments. The resulting model constitutes a reliable and scalable digital twin of the T3000 wagon, suitable for predictive simulations and virtual testing. Future developments will focus on a deeper investigation of the buffer interaction through an additional experimental campaign, further extending the digital twin’s capability to represent the full dynamic behavior of articulated freight trains.

Schlagwörter

Stichwörter der Autor:innen

articulated freight wagondigital twinexperimental validationhigh-fidelity modelingmultibody simulationrailway dynamicsrailway vehicle

Autor:innen und Institutionen

  • Department of Industrial Engineering, University of Florence, 50139 Florence, Italy.
  • Department of Mechanical Engineering, Politecnico di Milano, 20133 Milan, Italy.
  • Department of Industrial Engineering, University of Naples, 80138 Naples, Italy.
  • Mercitalia Intermodal SpA, 20151 Milano, Italy.

ORCID-Profile: Alessio Cascino, Laurens Lanzillo, Francesco Mazzeo, Salvatore Strano, Enrico Meli

Förderung

  • MOST—Sustainable Mobility National Research Center
  • European Union Next-GenerationEU

Zitieren

APA

Cascino, A., Nencioni, L., Lanzillo, L., Mazzeo, F., Strano, S., Terzo, M., Delle Monache, S., & Meli, E. (2026). Development and Experimental Validation of a Physics-Based Digital Twin for Railway Freight Wagon Monitoring. Sensors, 26(2), 643. https://doi.org/10.3390/s26020643

Vancouver

Cascino A, Nencioni L, Lanzillo L, Mazzeo F, Strano S, Terzo M, et al. Development and Experimental Validation of a Physics-Based Digital Twin for Railway Freight Wagon Monitoring. Sensors. 2026;26(2):643. doi:10.3390/s26020643

BibTeX
@article{Cascino2026,
  author = {Cascino, Alessio and Nencioni, Leandro and Lanzillo, Laurens and Mazzeo, Francesco and Strano, Salvatore and Terzo, Mario and Delle Monache, Simone and Meli, Enrico},
  title = {Development and Experimental Validation of a Physics-Based Digital Twin for Railway Freight Wagon Monitoring},
  journal = {Sensors},
  year = {2026},
  volume = {26},
  number = {2},
  pages = {643},
  doi = {10.3390/s26020643}
}
Kostenlos starten →