EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

LSTM-Based Absolute Position Estimation of a 2-DOF Planar Delta Robot Using Time-Series Data

Seunghwan Baek iD

Sensors · 10.01.2026 · 26 (2) · 470

DOI: 10.3390/s26020470 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 10.01.2026. Verfasst von Seunghwan Baek. Beteiligte Einrichtung: Department of Electrical and Electronic Engineering, Youngsan University, Yangsan 50510, Republic of Korea. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 23 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: The Ministry of Education(MOE) and the Gyeongsangnam-do Provincial Government, Ministry of Educatio, Gyeongsangnam-do Provincial Government, Republic of Korea.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Accurately estimating the absolute position of robots under external loads is challenging due to nonlinear dynamics, posture-dependent manipulability, and structural sensitivities. This study investigates a data-driven approach for absolute position prediction of a 2-DOF planar delta robot by learning time-series force signals generated during manipulability-driven free motion. Constant torques of opposite directions were applied to the robot without any position or trajectory control, allowing the mechanism to move naturally according to its configuration-dependent manipulability. Reaction forces measured at the end-effector and relative encoder variations were collected across a grid of workspace locations and used to construct a 12-channel time-series input. A hybrid deep learning architecture combining 1D convolutional layers and a bidirectional LSTM network was trained to regress the robot’s absolute X–Y position. Experimental results demonstrate that the predicted trajectories closely match the measured paths in the workspace, yielding overall RMSE values of 3.81 mm(X) and 2.94 mm(Y). Statistical evaluation using RMSE shows that approximately 83.73% of all test sequences achieve an error below 5 mm. The findings confirm that LSTM models can effectively learn posture-dependent dynamic behavior and force-manipulability relationships.

Schlagwörter

Stichwörter der Autor:innen

2-DOF delta robotLSTMrobot dynamicsrobot manipulabilitytime-series data

Autor:innen und Institutionen

  • Department of Electrical and Electronic Engineering, Youngsan University, Yangsan 50510, Republic of Korea.

ORCID-Profile: Seunghwan Baek

Förderung

  • The Ministry of Education(MOE) and the Gyeongsangnam-do Provincial Government
  • Ministry of Educatio
  • Gyeongsangnam-do Provincial Government, Republic of Korea

Zitieren

APA

Baek, S. (2026). LSTM-Based Absolute Position Estimation of a 2-DOF Planar Delta Robot Using Time-Series Data. Sensors, 26(2), 470. https://doi.org/10.3390/s26020470

Vancouver

Baek S. LSTM-Based Absolute Position Estimation of a 2-DOF Planar Delta Robot Using Time-Series Data. Sensors. 2026;26(2):470. doi:10.3390/s26020470

BibTeX
@article{Baek2026,
  author = {Baek, Seunghwan},
  title = {LSTM-Based Absolute Position Estimation of a 2-DOF Planar Delta Robot Using Time-Series Data},
  journal = {Sensors},
  year = {2026},
  volume = {26},
  number = {2},
  pages = {470},
  doi = {10.3390/s26020470}
}
Kostenlos starten →