ROS 2-Based Architecture for Autonomous Driving Systems: Design and Implementation
Sensors · 10.01.2026 · 26 (2) · 463
DOI: 10.3390/s26020463 ↗Kurz gefasst
Fachartikel in der Zeitschrift Sensors, online erschienen am 10.01.2026. Verfasst von Andrea Bonci und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Information Engineering, Marche Polytechnic University, 60131 Ancona, Italy. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 37 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: EU - European Union - Next Generation Eu - under the National Recovery and Resilience Plan (NRRP), Mission 4 Component 1, Investment 4.1 - Decree No. 118 (2nd…, Italian National Program PhD Programme in Autonomous Systems.
Abstract (Originalsprache)
Interest in the adoption of autonomous vehicles (AVs) continues to grow. It is essential to design new software architectures that meet stringent real-time, safety, and scalability requirements while integrating heterogeneous hardware and software solutions from different vendors and developers. This paper presents a lightweight, modular, and scalable architecture grounded in Service-Oriented Architecture (SOA) principles and implemented in ROS 2 (Robot Operating System 2). The proposed design leverages ROS 2’s Data Distribution System-based Quality-of-Service model to provide reliable communication, structured lifecycle management, and fault containment across distributed compute nodes. The architecture is organized into Perception, Planning, and Control layers with decoupled sensor access paths to satisfy heterogeneous frequency and hardware constraints. The decision-making core follows an event-driven policy that prioritizes fresh updates without enforcing global synchronization, applying zero-order hold where inputs are not refreshed. The architecture was validated on a 1:10-scale autonomous vehicle operating on a city-like track. The test environment covered canonical urban scenarios (lane-keeping, obstacle avoidance, traffic-sign recognition, intersections, overtaking, parking, and pedestrian interaction), with absolute positioning provided by an indoor GPS (Global Positioning System) localization setup. This work shows that the end-to-end Perception–Planning pipeline consistently met worst-case deadlines, yielding deterministic behaviour even under stress. The proposed architecture can be deemed compliant with real-time application standards for our use case on the 1:10 test vehicle, providing a robust foundation for deployment and further refinement.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Information Engineering, Marche Polytechnic University, 60131 Ancona, Italy.
- Department of Electrical and Information Engineering, Polytechnic of Bari, 70126 Bari, Italy.
ORCID-Profile: Andrea Bonci, Alessandro Di Biase, Aldo Franco Dragoni
Förderung
- EU - European Union - Next Generation Eu - under the National Recovery and Resilience Plan (NRRP), Mission 4 Component 1, Investment 4.1 - Decree No. 118 (2nd…
- Italian National Program PhD Programme in Autonomous Systems
Zitieren
APA
Bonci, A., Brunella, F., Colletta, M., Biase, A. D., Dragoni, A. F., & Libofsha, A. (2026). ROS 2-Based Architecture for Autonomous Driving Systems: Design and Implementation. Sensors, 26(2), 463. https://doi.org/10.3390/s26020463
Vancouver
Bonci A, Brunella F, Colletta M, Biase AD, Dragoni AF, Libofsha A. ROS 2-Based Architecture for Autonomous Driving Systems: Design and Implementation. Sensors. 2026;26(2):463. doi:10.3390/s26020463
BibTeX
@article{Bonci2026,
author = {Bonci, Andrea and Brunella, Federico and Colletta, Matteo and Biase, Alessandro Di and Dragoni, Aldo Franco and Libofsha, Angjelo},
title = {ROS 2-Based Architecture for Autonomous Driving Systems: Design and Implementation},
journal = {Sensors},
year = {2026},
volume = {26},
number = {2},
pages = {463},
doi = {10.3390/s26020463}
}
EUVIMED