EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Implementation of a Length Gauge Based on Optical Frequency Domain Reflectometry (OFDR)

Aleksey Shestakov iD, Dmitriy Kambur, Yuri Konstantinov iD, Maxim Belokrylov, D Claude, Igor Shardakov iD, Artem Turov iD

Sensors · 07.01.2026 · 26 (2) · 393

DOI: 10.3390/s26020393 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 07.01.2026. Verfasst von Aleksey Shestakov und 6 weiteren Autor:innen. Beteiligte Einrichtung: Institute of Continuous Media Mechanics of the Ural Branch of the Russian Academy of Sciences, Academician Korolev St. 1, Perm 614013, Russia. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 62 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Russian Science Foundation.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Optical frequency domain reflectometry (OFDR) is a widely used method for measuring optical lengths to backscattering points in optical fibers and integrated optical chips. However, its application for measuring absolute distances in other media, including free space, remains insufficiently studied. This work aims to solve two main challenges in developing a free-space distance measurement method based on OFDR. The first one is the adaptation of the standard OFDR method to air-based measurements, considering the complex and/or atypical composition of the optical line, including the combination of fiber and air, as well as differing chromatic dispersion. The second task is the calibration of the reflectometer to ensure high measurement accuracy. The article proposes a mathematical framework for eliminating the influence of chromatic dispersion, based on signal transformation and the introduction of an equivalent phase of the reference interferometer. The method was verified experimentally. The experimental setup included an OFDR system, a collimator, and a corner reflector movable along a 2-m rail. An important result is the development and testing of a dispersion compensation method, which eliminated peak broadening in the trace as the distance increased, maintaining its width at a level of tens of microns. Through calibration using an interferometric fringe-counting method, a frequency-to-distance conversion coefficient was determined, ensuring measurement accuracy up to 2 μm. Thus, the study demonstrates the feasibility of adapting OFDR for precise distributed distance measurements in free space and in complex or otherwise non-standard structured environments, significantly expanding the application scope of the technology.

Schlagwörter

Stichwörter der Autor:innen

interferometryoptical frequency domain reflectometryoptical frequency scanningoptical length gaugesoptical ranging

Autor:innen und Institutionen

  • Institute of Continuous Media Mechanics of the Ural Branch of the Russian Academy of Sciences, Academician Korolev St. 1, Perm 614013, Russia.
  • General Physics Department, Applied Mathematics and Mechanics Faculty, Perm National Research Polytechnic University, Komsomolsky Prospect, 29, Perm 614990, Russia.

ORCID-Profile: Aleksey Shestakov, Yuri Konstantinov, Igor Shardakov, Artem Turov

Förderung

  • Russian Science Foundation

Zitieren

APA

Shestakov, A., Kambur, D., Konstantinov, Y., Belokrylov, M., Claude, D., Shardakov, I., & Turov, A. (2026). Implementation of a Length Gauge Based on Optical Frequency Domain Reflectometry (OFDR). Sensors, 26(2), 393. https://doi.org/10.3390/s26020393

Vancouver

Shestakov A, Kambur D, Konstantinov Y, Belokrylov M, Claude D, Shardakov I, et al. Implementation of a Length Gauge Based on Optical Frequency Domain Reflectometry (OFDR). Sensors. 2026;26(2):393. doi:10.3390/s26020393

BibTeX
@article{Shestakov2026,
  author = {Shestakov, Aleksey and Kambur, Dmitriy and Konstantinov, Yuri and Belokrylov, Maxim and Claude, D and Shardakov, Igor and Turov, Artem},
  title = {Implementation of a Length Gauge Based on Optical Frequency Domain Reflectometry (OFDR)},
  journal = {Sensors},
  year = {2026},
  volume = {26},
  number = {2},
  pages = {393},
  doi = {10.3390/s26020393}
}
Kostenlos starten →