Design and Performance Analysis of a Hybrid Flexible Pressure Sensor with Wide Linearity and High Sensitivity
Sensors · 30.12.2025 · 26 (1) · 238
DOI: 10.3390/s26010238 ↗Kurz gefasst
Fachartikel in der Zeitschrift Sensors, online erschienen am 30.12.2025. Verfasst von Qinghua Zhang und 4 weiteren Autor:innen. Beteiligte Einrichtung: Artificial Intelligence School, Wuchang University of Technology, Wuhan 430223, China. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 25 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Hubei Engineering Research Center for BDS-Cloud High-Precision Deformation Monitoring, Natural Science Foundation of Chongqing, Chongqing Municipal Education Commission.
Abstract (Originalsprache)
This study presents a wide-linear-range flexible pressure sensor based on a gradient non-uniform porous structure. Through co-optimization of material composition and structural parameters, the sensor integrates high sensitivity, a broad linear response range, and excellent stability. The sensing layer is fabricated using a PVC/CNT composite slurry, with interdigital silver electrodes screen-printed on a PET substrate. A porous architecture is constructed via solution blending and a template method. Innovatively, orthogonal experiments were employed to optimize the conductive filler concentration and porosity. A mixed sugar template comprising particles of 50–75 μm and 125–150 μm was introduced to form a gradient non-uniform porous structure, effectively expanding the linear response range. Experimental results demonstrate that the sensor exhibits outstanding linearity (R2 > 0.99) and high sensitivity (5.57 kPa−1) over a broad pressure range of 0–120 kPa. It also shows a dynamic response speed of 50 ms, cyclic stability exceeding 500 cycles, and signal fluctuation of less than 5%. Scanning electron microscopy (SEM) analysis reveals the synergistic mechanism of the non-uniform pores, confirming the effectiveness of this design in reconciling the trade-off between sensitivity and linear range. This study offers new insights into the performance optimization of flexible pressure sensors and demonstrates significant potential for applications in health monitoring and electronic skin (E-skin).
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Artificial Intelligence School, Wuchang University of Technology, Wuhan 430223, China.
- College of Optoelectronic Engineering, Chengdu University of Information Technology, Chengdu 610225, China.
ORCID-Profile: Qinghua Zhang
Förderung
- Hubei Engineering Research Center for BDS-Cloud High-Precision Deformation Monitoring
- Natural Science Foundation of Chongqing
- Chongqing Municipal Education Commission
- Open Funding of Hubei Engineering Research Center for BDS-Cloud High-Precision Deformation Monitoring
Zitieren
APA
Zhang, Q., Liu, Z., Wu, J., Sun, P., & Zhang, H. (2025). Design and Performance Analysis of a Hybrid Flexible Pressure Sensor with Wide Linearity and High Sensitivity. Sensors, 26(1), 238. https://doi.org/10.3390/s26010238
Vancouver
Zhang Q, Liu Z, Wu J, Sun P, Zhang H. Design and Performance Analysis of a Hybrid Flexible Pressure Sensor with Wide Linearity and High Sensitivity. Sensors. 2025;26(1):238. doi:10.3390/s26010238
BibTeX
@article{Zhang2025,
author = {Zhang, Qinghua and Liu, Zhenxing and Wu, Jianbo and Sun, Ping and Zhang, Hanwen},
title = {Design and Performance Analysis of a Hybrid Flexible Pressure Sensor with Wide Linearity and High Sensitivity},
journal = {Sensors},
year = {2025},
volume = {26},
number = {1},
pages = {238},
doi = {10.3390/s26010238}
}
EUVIMED