EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Comparison of Giant Magnetoimpedance and Anisotropic Magnetoresistance Sensors for Residual Stress Distribution Determination in Magnetic Steels

Sergey Gudoshnikov, Tatiana Damatopoulou, Evangelos Hristoforou iD

Sensors · 20.12.2025 · 26 (1) · 32

DOI: 10.3390/s26010032 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 20.12.2025. Verfasst von Sergey Gudoshnikov und 2 weiteren Autor:innen. Beteiligte Einrichtung: Pushkov Institute of Terrestrial Magnetism, Ionosphere and Radio Wave Propagation, IZMIRAN, Kaluzhskoe, sh. 4, Troitsk, 108840 Moscow, Russia. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 17 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Our team has initiated work to determine residual stresses by means of monitoring magnetic properties, namely differential permeability, magnetoacoustic emission, and surface field components. Concerning surface field measurements, Hall, AMR, and TMR sensors have been used, with AMR and TMR sensors enabling 3D field determination. In this paper, we compare the surface magnetic field components with residual stresses in 2 mm thick AISI 4130 steel coupons. The steel samples were in a dog-bone structure with residual stresses induced by localized RF induction heating to create a temperature gradient, followed by quenching to transform the temperature gradient into a residual stress one. GMI and AMR sensors were used to determine the localized magnetic field component distribution on the surface of the steel coupons and at the same areas where the residual stresses were determined. The GMI sensor was able to monitor the field component perpendicular to the surface of the steel coupon, while the AMR sensor was able to monitor the three field components at the same points. The results illustrated that both sensors were able to monitor residual stresses, with the GMI sensor illustrating better sensitivity at a higher cost, while the AMR sensor had a lower sensitivity with a significantly lower cost as an integrated sensor.

Schlagwörter

Stichwörter der Autor:innen

anisotropic magnetoresistance (AMR)giant magnetoimpedance (GMI)magnetic stress calibration (MASC) curvesresidual stresssteel stress coupons

Autor:innen und Institutionen

  • Pushkov Institute of Terrestrial Magnetism, Ionosphere and Radio Wave Propagation, IZMIRAN, Kaluzhskoe, sh. 4, Troitsk, 108840 Moscow, Russia.
  • Laboratory of Electronic Sensors, National TU of Athens, Zografou Campus, 15780 Athens, Greece.
  • National Key Laboratory of Spintronics, Hangzhou International Innovation Institute, Beihang University, Hangzhou 311115, China.

ORCID-Profile: Evangelos Hristoforou

Zitieren

APA

Gudoshnikov, S., Damatopoulou, T., & Hristoforou, E. (2025). Comparison of Giant Magnetoimpedance and Anisotropic Magnetoresistance Sensors for Residual Stress Distribution Determination in Magnetic Steels. Sensors, 26(1), 32. https://doi.org/10.3390/s26010032

Vancouver

Gudoshnikov S, Damatopoulou T, Hristoforou E. Comparison of Giant Magnetoimpedance and Anisotropic Magnetoresistance Sensors for Residual Stress Distribution Determination in Magnetic Steels. Sensors. 2025;26(1):32. doi:10.3390/s26010032

BibTeX
@article{Gudoshnikov2025,
  author = {Gudoshnikov, Sergey and Damatopoulou, Tatiana and Hristoforou, Evangelos},
  title = {Comparison of Giant Magnetoimpedance and Anisotropic Magnetoresistance Sensors for Residual Stress Distribution Determination in Magnetic Steels},
  journal = {Sensors},
  year = {2025},
  volume = {26},
  number = {1},
  pages = {32},
  doi = {10.3390/s26010032}
}
Kostenlos starten →