From Wearable Sensor Networks to Markerless Motion Capture for Instrumental-Based Biomechanical Risk Assessment in Lifting Activities
Sensors · 2025
DOI: 10.3390/s25247427 ↗Kurz gefasst
Fachartikel in der Zeitschrift Sensors, 2025. Verfasst von Irene Gennarelli und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mathematics, Computer Science and Physics, University of Udine, Via Palladio 8, 33100 Udine, Italy. Hauptthemen laut MEDLINE: Wearable Electronic Devices, Lifting. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Manual material handling is one of the leading causes of work-related low-back disorders, and an accurate assessment of the biomechanical risk is essential to support prevention strategies. Despite workers’ interest in wearable sensor networks for quantifying exposure metrics, these systems still present several limitations, including potential interference with natural movements and workplaces, and concerns about durability and cost-effectiveness. For these reasons, alternative motion capture methods are being explored. Among them, completely markerless (ML) technologies are being increasingly applied in ergonomics. This study aimed to compare a wearable sensor network and an ML system in the evaluation of lifting tasks, focusing on the variables and multipliers used to compute the recommended weight limit (RWL) and the lifting index (LI) according to the revised NIOSH lifting equation. We hypothesized that ML systems equipped with multiple cameras may provide reliable and consistent estimations of these kinematic variables, thereby improving risk assessments. We also assumed that these ML approaches could represent valuable input for training AI algorithms capable of automatically classifying the biomechanical risk level. Twenty-eight workers performed standardized lifts under three risk conditions. The results showed significant differences between wearable sensor networks and ML systems for most measures, except at a low risk (LI = 1). Nevertheless, ML consistently showed a closer agreement with reference benchmarks and a lower variability. In terms of the automatic classification performance, ML–based kinematic variables yielded accuracy levels comparable to those obtained with the wearable system. These findings highlight the potential of ML approaches to deliver accurate, repeatable, and cost-effective biomechanical risk assessments, particularly in demanding lifting tasks.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Mathematics, Computer Science and Physics, University of Udine, Via Palladio 8, 33100 Udine, Italy.
- Department of Occupational and Environmental Medicine, Epidemiology and Hygiene, INAIL-National Institute for Insurance Against Accidents at Work, Via Fontana Candida 1, 00078 Monte Porzio Catone, Italy.
ORCID-Profile: Irene Gennarelli, Tiwana Varrecchia, Giorgia Chini, Niki Martinel, Christian Micheloni, Alberto Ranavolo
Zitieren
APA
Gennarelli, I., Varrecchia, T., Chini, G., Martinel, N., Micheloni, C., & Ranavolo, A. (2025). From Wearable Sensor Networks to Markerless Motion Capture for Instrumental-Based Biomechanical Risk Assessment in Lifting Activities. Sensors. https://doi.org/10.3390/s25247427
Vancouver
Gennarelli I, Varrecchia T, Chini G, Martinel N, Micheloni C, Ranavolo A. From Wearable Sensor Networks to Markerless Motion Capture for Instrumental-Based Biomechanical Risk Assessment in Lifting Activities. Sensors. 2025. doi:10.3390/s25247427
BibTeX
@article{Gennarelli2025,
author = {Gennarelli, Irene and Varrecchia, Tiwana and Chini, Giorgia and Martinel, Niki and Micheloni, Christian and Ranavolo, Alberto},
title = {From Wearable Sensor Networks to Markerless Motion Capture for Instrumental-Based Biomechanical Risk Assessment in Lifting Activities},
journal = {Sensors},
year = {2025},
doi = {10.3390/s25247427}
}
EUVIMED