Computer Model Based on an Asynchronous BLE 5.0 IMU Sensor Network for Biomechanical Applications
Sensors · 2025
DOI: 10.3390/s25237271 ↗Kurz gefasst
Fachartikel in der Zeitschrift Sensors, 2025. Verfasst von Juan Antonio Mora-Sánchez und 4 weiteren Autor:innen. Beteiligte Einrichtung: Centro de Investigación en Computación, Instituto Politécnico Nacional, Av. Juan de Dios Bátiz S/N, Nueva Industrial Vallejo, Gustavo A. Madero, Mexi…. Hauptthemen laut MEDLINE: Computer Simulation. Die Arbeit nennt 59 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Instituto Politécnico Nacional.
Abstract (Originalsprache)
The acquisition, processing, and monitoring of biomechanical variables in dynamic environments require sensor network architectures capable of handling high concurrency and large data volumes. This study aims to develop, validate, and deploy a robust asynchronous network architecture of Inertial Measurement Units (IMUs) utilizing Bluetooth Low Energy (BLE) 5.0 for real-time biomechanical signal acquisition, overcoming the range, speed, and stability limitations of prior implementations. A network of six IMUs was implemented, with communication managed by a hybrid Python 3.10–LabVIEW 2022 Q3 framework. This architecture ensures concurrent, asynchronous data acquisition while maintaining stable sensor interconnection through virtual port emulation. System evaluation demonstrated superior technical performance, exhibiting high acquisition efficiency (close to 100%) and data loss below ±2% across 75 assessments per sensor. These assessments were obtained by evaluating the posture of 25 participants during three postural experiments, with a maximum indoor range of 40 m and an outdoor range of 105 m, validating the system’s scalability and robustness for motion capture. The approach was applied in a case study using a Fuzzy Inference System (FIS) to assess the upper limb via the Rapid Upper Limb Assessment (RULA) method. The system successfully quantified the temporal distribution of injury risk bilaterally, overcoming the limitations of observational methods and providing objective metrics crucial for occupational health in seated tasks.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Centro de Investigación en Computación, Instituto Politécnico Nacional, Av. Juan de Dios Bátiz S/N, Nueva Industrial Vallejo, Gustavo A. Madero, Mexico City 07738, Mexico.
- Escuela Superior de Ingeniería Mecánica y Eléctrica Unidad Azcapotzalco, Instituto Politécnico Nacional, Av. de las Granjas 682, Azcapotzalco, Mexico City 02250, Mexico.
ORCID-Profile: Juan Antonio Mora-Sánchez, Luis Pastor Sánchez-Fernández, Diana Lizet González-Baldovinos, María Teresa Zagaceta-Álvarez, Sandra Dinora Orantes-Jiménez
Förderung
- Instituto Politécnico Nacional
Zitieren
APA
Mora-Sánchez, J. A., Sánchez-Fernández, L. P., González-Baldovinos, D. L., Zagaceta-Álvarez, M. T., & Orantes-Jiménez, S. D. (2025). Computer Model Based on an Asynchronous BLE 5.0 IMU Sensor Network for Biomechanical Applications. Sensors. https://doi.org/10.3390/s25237271
Vancouver
Mora-Sánchez JA, Sánchez-Fernández LP, González-Baldovinos DL, Zagaceta-Álvarez MT, Orantes-Jiménez SD. Computer Model Based on an Asynchronous BLE 5.0 IMU Sensor Network for Biomechanical Applications. Sensors. 2025. doi:10.3390/s25237271
BibTeX
@article{MoraSnchez2025,
author = {Mora-Sánchez, Juan Antonio and Sánchez-Fernández, Luis Pastor and González-Baldovinos, Diana Lizet and Zagaceta-Álvarez, María Teresa and Orantes-Jiménez, Sandra Dinora},
title = {Computer Model Based on an Asynchronous BLE 5.0 IMU Sensor Network for Biomechanical Applications},
journal = {Sensors},
year = {2025},
doi = {10.3390/s25237271}
}
EUVIMED