EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Automatic Calibration and Update of a Digital Twin for Plug & Produce

Mattias Bennulf iD, Sudha Ramasamy iD, Xiaoxiao Zhang iD, Fredrik Danielsson iD, Janardhanan Swathanandan iD

Sensors · 11.11.2025 · 25 (22) · 6885

DOI: 10.3390/s25226885 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 11.11.2025. Verfasst von Mattias Bennulf und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Engineering Science, University West, 461 86 Trollhättan, Sweden. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 33 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: KK Stiftelsen, KK-stiftelsen, Sweden.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This article presents a system for automatically updating a digital twin model, used for automated path planning of an industrial robot. The digital twin needs to be accurately calibrated in relation to the resource locations due to the physical limitations of placing resources out precisely. The process considered is a surface roughness measurement of aerospace metal parts that requires high positional accuracy. The scenario takes place in a robot cell that is a Plug & Produce system, where resources can be added and removed in minutes, allowing fast reconfiguration of the production resources. This means that an automated path planner is required for the robot to adapt to new locations of these resources automatically. A digital twin is proposed, consisting of a robot path planner and a simulation model that is updated when resources are added to the system. The resources should automatically appear in the simulation and be placed at an accurate location. The purpose of automating these steps is to make the update of the digital twin faster during production and remove the requirement for expert knowledge.

Schlagwörter

Stichwörter der Autor:innen

Industry 4.0Plug & Producecalibrationdigital twinindustrial robotsmanufacturing

Autor:innen und Institutionen

  • Department of Engineering Science, University West, 461 86 Trollhättan, Sweden.
  • GKN Aerospace Engine Systems, 461 81 Trollhättan, Sweden.

ORCID-Profile: Mattias Bennulf, Sudha Ramasamy, Xiaoxiao Zhang, Fredrik Danielsson, Janardhanan Swathanandan

Förderung

  • KK Stiftelsen
  • KK-stiftelsen, Sweden

Zitieren

APA

Bennulf, M., Ramasamy, S., Zhang, X., Danielsson, F., & Swathanandan, J. (2025). Automatic Calibration and Update of a Digital Twin for Plug & Produce. Sensors, 25(22), 6885. https://doi.org/10.3390/s25226885

Vancouver

Bennulf M, Ramasamy S, Zhang X, Danielsson F, Swathanandan J. Automatic Calibration and Update of a Digital Twin for Plug & Produce. Sensors. 2025;25(22):6885. doi:10.3390/s25226885

BibTeX
@article{Bennulf2025,
  author = {Bennulf, Mattias and Ramasamy, Sudha and Zhang, Xiaoxiao and Danielsson, Fredrik and Swathanandan, Janardhanan},
  title = {Automatic Calibration and Update of a Digital Twin for Plug & Produce},
  journal = {Sensors},
  year = {2025},
  volume = {25},
  number = {22},
  pages = {6885},
  doi = {10.3390/s25226885}
}
Kostenlos starten →