EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Development of a Low-Cost Infrared Imaging System for Real-Time Analysis and Machine Learning-Based Monitoring of GMAW

Jairo José Muñoz Chávez, Margareth Nascimento de Souza Lira iD, Gerardo Antonio Idrobo Pizo, João da Cruz Payão Filho iD, Sadek Crisostomo Absi Alfaro iD, José Maurício Santos Torres da Motta iD

Sensors · 10.11.2025 · 25 (22) · 6858

DOI: 10.3390/s25226858 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 10.11.2025. Verfasst von Jairo José Muñoz Chávez und 5 weiteren Autor:innen. Beteiligte Einrichtung: Programa de Engenharia Metalúrgica e de Materiais, Universidade Federal do Rio de Janeiro (UFRJ), Rio de Janeiro CEP 21941-972, RJ, Brazil. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This research presents a novel, low-cost optical acquisition system based on infrared imaging for real-time weld bead geometry monitoring in Gas Metal Arc Welding (GMAW). The system uniquely employs a commercial CCD camera (1000–1150 nm) with tailored filters and lenses to isolate molten pool thermal radiation while mitigating arc interference. A single camera and a mirror-based setup simultaneously capture weld bead width and reinforcement. Acquired images are processed in real time (10 ms intervals) using MATLAB R2016b algorithms for edge segmentation and geometric parameter extraction. Dimensional accuracy under different welding parameters was ensured through camera calibration modeling. Validation across 35 experimental trials (over 6000 datapoints) using laser profilometry and manual measurements showed errors below 1%. The resulting dataset successfully trained a Support Vector Machine, highlighting the system’s potential for smart manufacturing and predictive modeling. This study demonstrates the viability of high-precision, low-cost weld monitoring for enhanced real-time control and automation in welding applications.

Schlagwörter

Stichwörter der Autor:innen

GMAW monitoringinfrared imaginglow-cost sensorsreal-time image processingweld bead geometry

Autor:innen und Institutionen

  • Programa de Engenharia Metalúrgica e de Materiais, Universidade Federal do Rio de Janeiro (UFRJ), Rio de Janeiro CEP 21941-972, RJ, Brazil.
  • Programa de Pós-Graduação em Engenharia Mecatrônica, Departamento de Engenharia Mecânica, Universidade de Brasília (UnB), Brasília CEP 70910-900, DF, Brazil.

ORCID-Profile: Margareth Nascimento de Souza Lira, João da Cruz Payão Filho, Sadek Crisostomo Absi Alfaro, José Maurício Santos Torres da Motta

Zitieren

APA

Muñoz Chávez, J. J., Lira, M. N. S., Pizo, G. A. I., Payão Filho, J. D. C., Alfaro, S. C. A., & Motta, J. M. S. T. D. (2025). Development of a Low-Cost Infrared Imaging System for Real-Time Analysis and Machine Learning-Based Monitoring of GMAW. Sensors, 25(22), 6858. https://doi.org/10.3390/s25226858

Vancouver

Muñoz Chávez JJ, Lira MNS, Pizo GAI, Payão Filho JDC, Alfaro SCA, Motta JMSTD. Development of a Low-Cost Infrared Imaging System for Real-Time Analysis and Machine Learning-Based Monitoring of GMAW. Sensors. 2025;25(22):6858. doi:10.3390/s25226858

BibTeX
@article{MuozChvez2025,
  author = {Muñoz Chávez, Jairo José and Lira, Margareth Nascimento de Souza and Pizo, Gerardo Antonio Idrobo and Payão Filho, João da Cruz and Alfaro, Sadek Crisostomo Absi and Motta, José Maurício Santos Torres da},
  title = {Development of a Low-Cost Infrared Imaging System for Real-Time Analysis and Machine Learning-Based Monitoring of GMAW},
  journal = {Sensors},
  year = {2025},
  volume = {25},
  number = {22},
  pages = {6858},
  doi = {10.3390/s25226858}
}
Kostenlos starten →