EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Research on Eddy Current Probes for Sensitivity Improvement in Fatigue Crack Detection of Aluminum Materials

Qing Zhang iD, Jiahuan Zheng iD, Shengping Wu, Yanchang Wang, Lijuan Li iD, Haitao Wang

Sensors · 03.10.2025 · 25 (19) · 6100

DOI: 10.3390/s25196100 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 03.10.2025. Verfasst von Qing Zhang und 5 weiteren Autor:innen. Beteiligte Einrichtung: College of Electrical Engineering and Control Science, Nanjing Tech University, Nanjing 211816, China. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 29 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Science and Technology Program of the State Administration for Market Regulation, Cultivation Fund for the Joint Laboratory of New Non-destructive Testing Technologies between Nanjing University of Aeronautics and Astronautics and the Univer….

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Aluminum alloys under long-term service or repetitive stress are prone to small fatigue cracks (FCs) with arbitrary orientations, necessitating eddy current probes with focused magnetic fields and directional selectivity for reliable detection. This study presents a flexible printed circuit board (FPCB) probe with a double-layer planar excitation coil and a double-layer differential receiving coil. The excitation coil employs a reverse-wound design to enhance magnetic field directionality and focusing, while the differential receiving coil improves sensitivity and suppresses common-mode noise. The probe is optimized by adjusting the excitation coil overlap and the excitation–receiving coil angles to maximize eddy current concentration and detection signals. Finite element simulations and experiments confirm the system’s effectiveness in detecting surface cracks of varying sizes and orientations. To further characterize these defects, two time-domain features are extracted: the peak-to-peak value (ΔP), reflecting amplitude variations associated with defect size and orientation, and the signal width (ΔW), primarily correlated with defect angle. However, substantial overlap in their value ranges for defects with different parameters means that these features alone cannot identify which specific parameter has changed, making prior defect classification using a Transformer-based approach necessary for accurate quantitative analysis. The proposed method demonstrates reliable performance and clear interpretability for defect evaluation in aluminum components.

Schlagwörter

Stichwörter der Autor:innen

directional selectivityeddy current probefatigue cracksmagnetic field focusing

Autor:innen und Institutionen

  • College of Electrical Engineering and Control Science, Nanjing Tech University, Nanjing 211816, China.
  • Directly Affiliated Branch Institute, Special Equipment Safety Supervision Inspection Institute of Jiangsu Province, Nanjing 210009, China.
  • 713th Research Institution, China State Shipbuilding Corporation Limited, Zhengzhou 450052, China.
  • College of Automation, Nanjing University of Aeronautics and Astronautics, Nanjing 211106, China.

ORCID-Profile: Qing Zhang, Jiahuan Zheng, Lijuan Li

Förderung

  • National Natural Science Foundation of China
  • Science and Technology Program of the State Administration for Market Regulation
  • Cultivation Fund for the Joint Laboratory of New Non-destructive Testing Technologies between Nanjing University of Aeronautics and Astronautics and the Univer…
  • Nondestructive Detection and Monitoring Technology for High Speed Transportation Facilities, Key Laboratory of Ministry of Industry and Information Technology
  • Jiangsu Provincial Key Laboratory of Culture and Tourism for Nondestructive Testing and Safety Traceability of Cultural Relics
  • Fundamental Research Funds for the Central Universities

Zitieren

APA

Zhang, Q., Zheng, J., Wu, S., Wang, Y., Li, L., & Wang, H. (2025). Research on Eddy Current Probes for Sensitivity Improvement in Fatigue Crack Detection of Aluminum Materials. Sensors, 25(19), 6100. https://doi.org/10.3390/s25196100

Vancouver

Zhang Q, Zheng J, Wu S, Wang Y, Li L, Wang H. Research on Eddy Current Probes for Sensitivity Improvement in Fatigue Crack Detection of Aluminum Materials. Sensors. 2025;25(19):6100. doi:10.3390/s25196100

BibTeX
@article{Zhang2025,
  author = {Zhang, Qing and Zheng, Jiahuan and Wu, Shengping and Wang, Yanchang and Li, Lijuan and Wang, Haitao},
  title = {Research on Eddy Current Probes for Sensitivity Improvement in Fatigue Crack Detection of Aluminum Materials},
  journal = {Sensors},
  year = {2025},
  volume = {25},
  number = {19},
  pages = {6100},
  doi = {10.3390/s25196100}
}
Kostenlos starten →