EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Exploring DC Power Quality Measurement and Characterization Techniques

Yara Daaboul iD, Daniela Istrate iD, Yann Le Bihan iD, Ludovic Bertin, Xavier Yang

Sensors · 01.10.2025 · 25 (19) · 6043

DOI: 10.3390/s25196043 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 01.10.2025. Verfasst von Yara Daaboul und 4 weiteren Autor:innen. Beteiligte Einrichtung: Laboratoire National de Métrologie et D'essais (LNE), 78190 Trappes, France. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Électricité de France (France), Association Nationale de la Recherche et de la Technologie, French National Association for Research and Technology.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Within the modernizing energy infrastructure of today, the integration of renewable energy sources and direct current (DC)-powered technologies calls for the re-examination of traditional alternative current (AC) networks. Low-voltage DC (LVDC) grids offer an attractive way forward in reducing conversion losses and simplifying local power management. However, ensuring reliable operation depends on a thorough understanding of DC distortions—phenomena generated by power converters, source instability, and varying loads. Two complementary traceable measurement chains are presented in this article with the purpose of measuring the steady-state DC component and the amplitude and frequency of the distortions around the DC bus with low uncertainties. One chain is optimized for laboratory environments, with high effectiveness in a controlled setup, and the other one is designed as a flexible and easily transportable solution, ensuring efficient and accurate assessments of DC distortions for field applications. In addition to our hardware solutions fully characterized by the uncertainty budget, we present the measurement method used for assessing DC distortions after evaluating the limitations of conventional AC techniques. Both arrangements are set to measure voltages of up to 1000 V, currents of up to 30 A, and frequency components of up to 150–500 kHz, with an uncertainty varying from 0.01% to less than 1%. This level of accuracy in the measurements will allow us to draw reliable conclusions regarding the dynamic behavior of future LVDC grids.

Schlagwörter

Stichwörter der Autor:innen

DC distortionsDC rippleLVDC gridsaccuracymeasurement chain

Autor:innen und Institutionen

  • Laboratoire National de Métrologie et D'essais (LNE), 78190 Trappes, France.
  • GeePs, Laboratoire de Génie Electrique Et Electronique de Paris, CNRS, CentraleSupélec, University Paris-Saclay, Sorbonne University, 91190 Gif-sur-Yvette, France.
  • EDF-R&D, Electricité de France, 91190 Saclay, France.

ORCID-Profile: Yara Daaboul, Daniela Istrate, Yann Le Bihan

Förderung

  • Électricité de France (France)
  • Association Nationale de la Recherche et de la Technologie
  • French National Association for Research and Technology
  • EDF R&D

Zitieren

APA

Daaboul, Y., Istrate, D., Le Bihan, Y., Bertin, L., & Yang, X. (2025). Exploring DC Power Quality Measurement and Characterization Techniques. Sensors, 25(19), 6043. https://doi.org/10.3390/s25196043

Vancouver

Daaboul Y, Istrate D, Le Bihan Y, Bertin L, Yang X. Exploring DC Power Quality Measurement and Characterization Techniques. Sensors. 2025;25(19):6043. doi:10.3390/s25196043

BibTeX
@article{Daaboul2025,
  author = {Daaboul, Yara and Istrate, Daniela and Le Bihan, Yann and Bertin, Ludovic and Yang, Xavier},
  title = {Exploring DC Power Quality Measurement and Characterization Techniques},
  journal = {Sensors},
  year = {2025},
  volume = {25},
  number = {19},
  pages = {6043},
  doi = {10.3390/s25196043}
}
Kostenlos starten →