EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Diffusion-Based Frequency Hopping for Collision Mitigation in Dense Bluetooth Networks

Giwon Yang iD, Hyungjoon Shin iD, Hyogon Kim iD

Sensors · 20.09.2025 · 25 (18) · 5893

DOI: 10.3390/s25185893 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 20.09.2025. Verfasst von Giwon Yang und 2 weiteren Autor:innen. Beteiligte Einrichtung: Department of Computer Science and Engineering, Korea University, Anam-Dong, Sungbuk-Gu, Seoul 02841, Republic of Korea. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 37 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Institute of Information & Communications Technol- 608 ogy Planning & Evaluation(IITP)-ICT Creative Consilience Program grant funded by the Korea 609 governmen…, Korean government (MSIT).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This paper challenges the conventional wisdom of using uniform random resource selection for collision resolution in distributed scheduling, particularly in wireless protocols. Bluetooth, being one such technology, is analyzed through its frequency hopping mechanism to explore for a better alternative in random access MAC (medium access control). Using diffusion theory, we characterize Bluetooth’s original frequency hopping as exhibiting maximum diffusivity, which correlates with unnecessarily high collision rates and a short mean first encounter time (MFET) between nodes. MFET, defined as the expected time until two independent hopping sequences first collide on the same channel, serves as an intuitive metric for evaluating collision likelihood. This insight leads to the proposal of a new collision avoidance mechanism with reduced diffusivity, effectively increasing MFET while maintaining efficient spectrum utilization. Our analysis and simulation results demonstrate that it can significantly lower packet collisions, outperforming existing techniques such as adaptive frequency hopping. The results are further corroborated by a real-life prototype implementation that closely replicates the predicted performance. The proposed diffusion-based MAC, by explicitly targeting longer MFETs, is expected to better handle dense Bluetooth environments, which are becoming increasingly common.

Schlagwörter

Stichwörter der Autor:innen

Bluetoothdiffusion theoryfrequency hoppingmean first encounter time (MFET)packet collisionrandom access MAC

Autor:innen und Institutionen

  • Department of Computer Science and Engineering, Korea University, Anam-Dong, Sungbuk-Gu, Seoul 02841, Republic of Korea.

ORCID-Profile: Giwon Yang, Hyungjoon Shin, Hyogon Kim

Förderung

  • Institute of Information & Communications Technol- 608 ogy Planning & Evaluation(IITP)-ICT Creative Consilience Program grant funded by the Korea 609 governmen…
  • Korean government (MSIT)

Zitieren

APA

Yang, G., Shin, H., & Kim, H. (2025). Diffusion-Based Frequency Hopping for Collision Mitigation in Dense Bluetooth Networks. Sensors, 25(18), 5893. https://doi.org/10.3390/s25185893

Vancouver

Yang G, Shin H, Kim H. Diffusion-Based Frequency Hopping for Collision Mitigation in Dense Bluetooth Networks. Sensors. 2025;25(18):5893. doi:10.3390/s25185893

BibTeX
@article{Yang2025,
  author = {Yang, Giwon and Shin, Hyungjoon and Kim, Hyogon},
  title = {Diffusion-Based Frequency Hopping for Collision Mitigation in Dense Bluetooth Networks},
  journal = {Sensors},
  year = {2025},
  volume = {25},
  number = {18},
  pages = {5893},
  doi = {10.3390/s25185893}
}
Kostenlos starten →