Bridging the Methodological Gap Between Inertial Sensors and Optical Motion Capture: Deep Learning as the Path to Accurate Joint Kinematic Modelling Using Inertial Sensors
Sensors · 2025
DOI: 10.3390/s25185728 ↗Kurz gefasst
Fachartikel in der Zeitschrift Sensors, 2025. Verfasst von Vaibhav R Shah und 1 weiteren Autor:innen. Beteiligte Einrichtung: Institute of Biomedical Engineering, Faculty of Medicine, University of Montreal, Montreal, QC H3T 1J4, Canada. Hauptthemen laut MEDLINE: Deep Learning, Joints. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 42 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Natural Sciences and Engineering Research Council, Fonds de Recherche du Québec - Santé, TransMedTech.
Abstract (Originalsprache)
As advancements in inertial measurement units (IMUs) for motion analysis progress, the inability to directly apply decades of research-based optical motion capture (OMC) methodologies presents a significant challenge. This study aims to bridge this gap by proposing an innovative deep learning approach to predict marker positions from IMU data, allowing traditional OMC-based calculations to estimate joint kinematics. Eighteen participants walked on a treadmill with seven IMUs and retroreflective markers. Trials were divided into normalized gait cycles (101 frames), and an autoencoder network with a custom Biomech loss function was used to predict 16 marker positions from IMU data. The model was validated using the leave-one-subject-out method and assessed using root mean squared error (RMSE). Joint angles in the sagittal plane were calculated using OMC methods, and RMSE was computed with and without alignment using dynamic time warping (DTW). The models were also tested on external datasets. Marker predictions achieved RMSE values of 2–4 cm, enabling joint angle predictions with 4–7° RMSE without alignment and 2–4° RMSE after DTW for sagittal plane joint angles (ankle, knee, hip). Validation using separate and open-source datasets confirmed the model’s generalizability, with similar RMSE values across datasets (4–7° RMSE without DTW and 2–4° with DTW). This study demonstrates the feasibility of applying conventional biomechanical models to IMUs, enabling accurate movement analysis and visualization outside controlled environments. This approach to predicting marker positions helps to bridge the gap between IMUs and OMC systems, enabling decades of research-based biomechanical methodologies to be applied to IMU data.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Institute of Biomedical Engineering, Faculty of Medicine, University of Montreal, Montreal, QC H3T 1J4, Canada.
- Centre de Recherche Azrieli du CHU Sainte-Justine (CRCHUSJ), Montreal, QC H3T 1C5, Canada.
- Department of Kinesiology and Physical Activity, McGill University, Montreal, QC H2W 1S4, Canada.
ORCID-Profile: Philippe C Dixon
Förderung
- Natural Sciences and Engineering Research Council
- Fonds de Recherche du Québec - Santé
- TransMedTech
- Fonds de Recherche Québec (FRQ) (Santé sector)
Zitieren
APA
Shah, V. R., & Dixon, P. C. (2025). Bridging the Methodological Gap Between Inertial Sensors and Optical Motion Capture: Deep Learning as the Path to Accurate Joint Kinematic Modelling Using Inertial Sensors. Sensors. https://doi.org/10.3390/s25185728
Vancouver
Shah VR, Dixon PC. Bridging the Methodological Gap Between Inertial Sensors and Optical Motion Capture: Deep Learning as the Path to Accurate Joint Kinematic Modelling Using Inertial Sensors. Sensors. 2025. doi:10.3390/s25185728
BibTeX
@article{Shah2025,
author = {Shah, Vaibhav R and Dixon, Philippe C},
title = {Bridging the Methodological Gap Between Inertial Sensors and Optical Motion Capture: Deep Learning as the Path to Accurate Joint Kinematic Modelling Using Inertial Sensors},
journal = {Sensors},
year = {2025},
doi = {10.3390/s25185728}
}
EUVIMED