EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Innovative Technologies to Improve Occupational Safety in Mining and Construction Industries—Part II

Paweł Bęś iD, Paweł Strzałkowski iD, Justyna Górniak-Zimroz iD, Mariusz Szóstak iD, Mateusz Janiszewski iD

Sensors · 2025

DOI: 10.3390/s25185717 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, 2025. Verfasst von Paweł Bęś und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mining, Faculty of Geoengineering, Mining and Geology, Wrocław University of Science and Technology, 50-370 Wroclaw, Poland. Hauptthemen laut MEDLINE: Construction Industry, Mining, Occupational Health. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 125 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Wrocław University of Science and Technology, Faculty of Geoengineering, Mining and Geology Wrocław University of Science and Technology.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Innovative technologies have been supporting the improvement of comfort and safety at work in construction and mining, which are classified as high-risk sectors, for many years. A two-part study (Part I and Part II) was conducted in which the implementation of innovative technologies was analysed and evaluated (opportunities and limitations). In Part II, the technologies employed in the work environment by employees to enhance their comfort and safety at work were analysed. These technologies encompass virtual and augmented reality, innovative personal and collective protective equipment, and exoskeletons. Following a thorough analysis of the extant scientific literature from the Scopus database, it was determined that there were research gaps that required attention. In addition to the evident advantages of enhancing the safety of workers, innovative technological solutions also engender numerous economic benefits for employers, which impact sustainable development in enterprises. In order to fully exploit the potential of modern technologies, it is necessary to continue their integration and overcome implementation barriers, such as the need for changes in education and training, adequate funding, and the development of safety awareness and culture in companies.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Construction IndustryMiningOccupational HealthHumansProtective Devices

Stichwörter der Autor:innen

constructioninnovative technologiesminingoccupational safety

Autor:innen und Institutionen

  • Department of Mining, Faculty of Geoengineering, Mining and Geology, Wrocław University of Science and Technology, 50-370 Wroclaw, Poland.
  • Department of Geodesy and Geoinformatics, Faculty of Geoengineering, Mining and Geology, Wrocław University of Science and Technology, 50-370 Wroclaw, Poland.
  • Department of General Construction, Faculty of Civil Engineering, Wrocław University of Science and Technology, 50-370 Wroclaw, Poland.
  • Department of Civil Engineering, School of Engineering, Aalto University, P.O. Box 12100, FI-00076 Espoo, Finland.

ORCID-Profile: Paweł Bęś, Paweł Strzałkowski, Justyna Górniak-Zimroz, Mariusz Szóstak, Mateusz Janiszewski

Förderung

  • Wrocław University of Science and Technology
  • Faculty of Geoengineering, Mining and Geology Wrocław University of Science and Technology

Zitieren

APA

Bęś, P., Strzałkowski, P., Górniak-Zimroz, J., Szóstak, M., & Janiszewski, M. (2025). Innovative Technologies to Improve Occupational Safety in Mining and Construction Industries—Part II. Sensors. https://doi.org/10.3390/s25185717

Vancouver

Bęś P, Strzałkowski P, Górniak-Zimroz J, Szóstak M, Janiszewski M. Innovative Technologies to Improve Occupational Safety in Mining and Construction Industries—Part II. Sensors. 2025. doi:10.3390/s25185717

BibTeX
@article{B2025,
  author = {Bęś, Paweł and Strzałkowski, Paweł and Górniak-Zimroz, Justyna and Szóstak, Mariusz and Janiszewski, Mateusz},
  title = {Innovative Technologies to Improve Occupational Safety in Mining and Construction Industries—Part II},
  journal = {Sensors},
  year = {2025},
  doi = {10.3390/s25185717}
}
Kostenlos starten →