EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Monitoring of Ammonia in Biomass Combustion Flue Gas Using a Zeolite-Based Capacitive Sensor

Thomas Wöhrl, Mario König iD, Ralf Moos iD, Gunter Hagen

Sensors · 04.09.2025 · 25 (17) · 5519

DOI: 10.3390/s25175519 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 04.09.2025. Verfasst von Thomas Wöhrl und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Functional Materials, Zentrum für Energietechnik (ZET), University of Bayreuth, D-95440 Bayreuth, Germany. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 74 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Bundesministerium für Wirtschaft und Energie, Federal Ministry for Economic Affairs andEnergy, Germany.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The emissions from biomass combustion systems have recently been the subject of increased attention. In addition to elevated concentrations of particulate matter and hydrocarbons (HCs) in the flue gas, significant levels of NOx emissions occur depending on the used fuel, such as biogenic residues. In response to legal requirements, owners of medium-sized plants (≈100 kW) are now also forced to minimize these emissions by means of selective catalytic reduction systems (SCR). The implementation of a selective sensor is essential for the efficient dosing of the reducing agent, which is converted to ammonia (NH3) in the flue gas. Preliminary laboratory investigations on a capacitive NH3 sensor based on a zeolite functional film have demonstrated a high sensitivity to ammonia with minimal cross-influences from H2O and NOx. Further investigations concern the application of this sensor in the real flue gas of an ordinary wood-burning stove and of combustion plants for biogenic residues with an ammonia dosage. The findings demonstrate a high degree of agreement between the NH3 concentration measured by the sensor and an FTIR spectrometer. Furthermore, the investigation of the long-term stability of the sensor and the poisoning effects of SO2 and HCl are of particular relevance to the laboratory measurements in this study, which show promising results.

Schlagwörter

Stichwörter der Autor:innen

ammonia detectionbiomass combustionflue gas aftertreatmentzeolite-based gas sensor

Autor:innen und Institutionen

  • Department of Functional Materials, Zentrum für Energietechnik (ZET), University of Bayreuth, D-95440 Bayreuth, Germany.
  • Deutsches Biomasseforschungszentrum Gemeinnützige GmbH (DBFZ), D-04347 Leipzig, Germany.

ORCID-Profile: Mario König, Ralf Moos

Förderung

  • Bundesministerium für Wirtschaft und Energie
  • Federal Ministry for Economic Affairs andEnergy, Germany

Zitieren

APA

Wöhrl, T., König, M., Moos, R., & Hagen, G. (2025). Monitoring of Ammonia in Biomass Combustion Flue Gas Using a Zeolite-Based Capacitive Sensor. Sensors, 25(17), 5519. https://doi.org/10.3390/s25175519

Vancouver

Wöhrl T, König M, Moos R, Hagen G. Monitoring of Ammonia in Biomass Combustion Flue Gas Using a Zeolite-Based Capacitive Sensor. Sensors. 2025;25(17):5519. doi:10.3390/s25175519

BibTeX
@article{Whrl2025,
  author = {Wöhrl, Thomas and König, Mario and Moos, Ralf and Hagen, Gunter},
  title = {Monitoring of Ammonia in Biomass Combustion Flue Gas Using a Zeolite-Based Capacitive Sensor},
  journal = {Sensors},
  year = {2025},
  volume = {25},
  number = {17},
  pages = {5519},
  doi = {10.3390/s25175519}
}
Kostenlos starten →