EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Modeling and Validation of Oocyte Mechanical Behavior Using AFM Measurement and Multiphysics Simulation

Yue Du, Yu Cai, Zhanli Yang, Ke Gao, Mingzhu Sun iD, Xin Zhao

Sensors · 2025

DOI: 10.3390/s25175479 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, 2025. Verfasst von Yue Du und 5 weiteren Autor:innen. Beteiligte Einrichtung: School of Computer and Information Science, Qinghai Institute of Technology, Xining 810016, China. Hauptthemen laut MEDLINE: Oocytes, Microscopy, Atomic Force, Models, Biological. Die Arbeit nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: the National Natural Science Foundation of China, the Science and Technology Foundation of Qinghai Province, National Key R&D Program of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Mechanical models are capable of simulating the deformation and stress distribution of oocytes under external forces, thereby providing insights into the underlying mechanisms of intracellular mechanical responses. Interactions with micromanipulation tools involve forces like compression and punction, which are effectively analyzed using principles of solid mechanics. Alternatively, fluid–structure interactions, such as shear stress at fluid junctions or pressure gradients within microchannels, are best described by a multiphase flow model. Developing the two models instead of a single comprehensive model is necessary due to the distinct nature of cell–tool interactions and cell–fluid interactions. In this study, we developed a finite element (FE) model of porcine oocytes that accounts for the viscoelastic properties of the zona pellucida (ZP) and cytoplasm for the case when the oocytes interacted with a micromanipulation tool. Atomic force microscopy (AFM) was employed to measure the Young’s modulus and creep behavior of these subcellular components that were incorporated into the FE model. When the oocyte was solely interacting with the fluids, we simulated oocyte deformation in microfluidic channels by modeling the oocyte-culture-medium system as a three-phase flow, considering the non-Newtonian behavior of the oocyte’s components. Our results show that the Young’s modulus of the ZP and cytoplasm were determined to be 7 kPa and 1.55 kPa, respectively, highlighting the differences in the mechanical properties between these subcomponents. Using the developed layered FE model, we accurately simulated oocyte deformation during their passage through a narrow-necked micropipette, with a deformation error of approximately 5.2% compared to experimental results. Using the three-phase flow model, we effectively simulated oocyte deformation in microfluidic channels under various pressures, validating the model’s efficacy through close agreement with experimental observations. This work significantly contributes to assessing oocyte quality and serves as a valuable tool for advancing cell mechanics studies.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

OocytesMicroscopy, Atomic ForceModels, BiologicalAnimalsFinite Element AnalysisSwineZona PellucidaFemaleElastic ModulusBiomechanical PhenomenaCytoplasm

Stichwörter der Autor:innen

AFMcell mechanical modelcreep behaviorlayered structurethree-phase flow modelviscoelastic properties

Autor:innen und Institutionen

  • School of Computer and Information Science, Qinghai Institute of Technology, Xining 810016, China.
  • National Key Laboratory of Intelligent Tracking and Forecasting for Infectious Diseases, The Engineering Research Center of Trusted Behavior Intelligence, Ministry of Education, The Tianjin Key Laboratory of intelligent…
  • Institute of Intelligence Technology and Robotic Systems, Shenzhen Research Institute of Nankai University, Shenzhen 518083, China.

ORCID-Profile: Mingzhu Sun

Förderung

  • the National Natural Science Foundation of China
  • the Science and Technology Foundation of Qinghai Province
  • National Key R&D Program of China
  • National Natural Science Foundation of China
  • Science and Technology Foundation of Qinghai Province
  • Tianjin Science and Technology Major Project

Zitieren

APA

Du, Y., Cai, Y., Yang, Z., Gao, K., Sun, M., & Zhao, X. (2025). Modeling and Validation of Oocyte Mechanical Behavior Using AFM Measurement and Multiphysics Simulation. Sensors. https://doi.org/10.3390/s25175479

Vancouver

Du Y, Cai Y, Yang Z, Gao K, Sun M, Zhao X. Modeling and Validation of Oocyte Mechanical Behavior Using AFM Measurement and Multiphysics Simulation. Sensors. 2025. doi:10.3390/s25175479

BibTeX
@article{Du2025,
  author = {Du, Yue and Cai, Yu and Yang, Zhanli and Gao, Ke and Sun, Mingzhu and Zhao, Xin},
  title = {Modeling and Validation of Oocyte Mechanical Behavior Using AFM Measurement and Multiphysics Simulation},
  journal = {Sensors},
  year = {2025},
  doi = {10.3390/s25175479}
}
Kostenlos starten →