EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Wearable Smart Gloves for Optimization Analysis of Disassembly and Assembly of Mechatronic Machines

Chin-Shan Chen iD, Hung Wei Chang, Bo-Chen Jiang

Sensors · 2025

DOI: 10.3390/s25175223 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, 2025. Verfasst von Chin-Shan Chen und 2 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical Engineering, National Pingtung University of Science and Technology, Pingtung 912301, Taiwan. Hauptthemen laut MEDLINE: Wearable Electronic Devices, Gloves, Protective. Die Arbeit nennt 26 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: the National Pingtung University of Science and Technology.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

With the rapid development of smart manufacturing, the optimization of real-time monitoring in operating procedures has become a crucial issue in modern industry. Traditional disassembly and assembly (D/A) work, relying on human experience and visual inspection, lacks immediacy and a quantitative basis, further affecting operating quality and efficiency. This study aims to develop a thin-film force sensor and an inertial measurement unit (IMU)-integrated wearable device for monitoring and analyzing operators’ behavioral characteristics during D/A tasks. First, by having operators wear self-made smart gloves and 17 IMU sensors, the work tables with three different heights are equipped with a mechatronics machine for the D/A experiment. Common D/A motions are designed into the experiment. Several subjects are invited to execute the standardized operating procedure, with upper limbs used to collect data on operators’ hand gestures and movements. Then, the measured data are applied to verify the performance measure functional best path of machine D/A. The results reveal that the system could effectively identify various D/A motions as well as observe operators’ force difference and motion mode, which, through the theory of performance indicator optimization and the verification of data analysis, could provide a reference for the best path planning, D/A sequence, and work table height design in the machine D/A process. The optimal workbench height for a standing operator is 5 to 10 cm above their elbow height. Performing assembly and disassembly tasks at this optimal height can help the operator save between 14.3933% and 35.2579% of physical effort. Such outcomes could aid in D/A behavior monitoring in industry, worker training, and operational optimization, as well as expand the application to instant feedback design for automation and smartization in a smart factory.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Wearable Electronic DevicesGloves, ProtectiveHumans

Stichwörter der Autor:innen

disassembly and assemblyinertial measurement unitoptimal pathoptimal work table heightperformance measure functionalsmart glovesthin-film force sensor

Autor:innen und Institutionen

  • Department of Mechanical Engineering, National Pingtung University of Science and Technology, Pingtung 912301, Taiwan.

ORCID-Profile: Chin-Shan Chen

Förderung

  • the National Pingtung University of Science and Technology

Zitieren

APA

Chen, C. S., Chang, H. W., & Jiang, B. C. (2025). Wearable Smart Gloves for Optimization Analysis of Disassembly and Assembly of Mechatronic Machines. Sensors. https://doi.org/10.3390/s25175223

Vancouver

Chen CS, Chang HW, Jiang BC. Wearable Smart Gloves for Optimization Analysis of Disassembly and Assembly of Mechatronic Machines. Sensors. 2025. doi:10.3390/s25175223

BibTeX
@article{Chen2025,
  author = {Chen, Chin-Shan and Chang, Hung Wei and Jiang, Bo-Chen},
  title = {Wearable Smart Gloves for Optimization Analysis of Disassembly and Assembly of Mechatronic Machines},
  journal = {Sensors},
  year = {2025},
  doi = {10.3390/s25175223}
}
Kostenlos starten →