A Spline Curve Fitting Model for Towed Streamer Positioning in Marine Seismic Exploration
Sensors · 18.08.2025 · 25 (16) · 5114
DOI: 10.3390/s25165114 ↗Kurz gefasst
Fachartikel in der Zeitschrift Sensors, online erschienen am 18.08.2025. Verfasst von Haonan Zhang und 6 weiteren Autor:innen. Beteiligte Einrichtung: School of Geosciences and Info-Physics, Central South University, Changsha 410083, China. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 33 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: the Project of the Department of Natural Resources of Hunan Province under, National Natural Science Foundation of China, the Project of the Department of Natural Resources of Hunan Province.
Abstract (Originalsprache)
The shape and position information of towed streamers is crucial for both implementing marine seismic exploration operations and analyzing exploration data. Streamer positioning accuracy directly impacts the quality and reliability of seismic imaging. Existing polynomial curve models exhibit deviations between the calculated and actual shapes during streamer turning. This paper proposes a segmented fitting positioning model based on spline curves. It is mathematically rigorous and applicable to complex scenarios. First, the specific function expression of the spline curve model is constructed. Then, using a cubic spline as an example, the segmented fitting method is explained, incorporating smoothness constraints at the connection points. The error equations for positioning observations and the calculation processes for curve parameters and hydrophone coordinates are derived. Finally, the model is verified through simulations and field tests. The experimental results show that, compared with the polynomial curve model, the spline curve model improves positioning accuracy by 47.1% in simulations involving six streamers and by 20.0% and 35.0% in field tests with six and ten streamers, respectively. In straight scenarios, both models perform similarly. Thus, the spline model can effectively reduce the modeling errors of the polynomial curve model under high-curvature conditions.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Geosciences and Info-Physics, Central South University, Changsha 410083, China.
- Geophysical Division of China Oilfield Services Ltd., Tianjin 300451, China.
- National Engineering Research Center of Offshore Oil and Gas Exploration, Beijing 100028, China.
- School of Electronics and Communication Engineering, Sun Yat-sen University, Shenzhen 518107, China.
ORCID-Profile: Kaiwei Sang
Förderung
- the Project of the Department of Natural Resources of Hunan Province under
- National Natural Science Foundation of China
- the Project of the Department of Natural Resources of Hunan Province
Zitieren
APA
Zhang, H., Sang, K., Yang, B., Duan, C., Lv, L., Kuang, C., & Liu, H. (2025). A Spline Curve Fitting Model for Towed Streamer Positioning in Marine Seismic Exploration. Sensors, 25(16), 5114. https://doi.org/10.3390/s25165114
Vancouver
Zhang H, Sang K, Yang B, Duan C, Lv L, Kuang C, et al. A Spline Curve Fitting Model for Towed Streamer Positioning in Marine Seismic Exploration. Sensors. 2025;25(16):5114. doi:10.3390/s25165114
BibTeX
@article{Zhang2025,
author = {Zhang, Haonan and Sang, Kaiwei and Yang, Baocai and Duan, Chufeng and Lv, Lingsheng and Kuang, Cuilin and Liu, Heng},
title = {A Spline Curve Fitting Model for Towed Streamer Positioning in Marine Seismic Exploration},
journal = {Sensors},
year = {2025},
volume = {25},
number = {16},
pages = {5114},
doi = {10.3390/s25165114}
}
EUVIMED