A Deep Learning-Based Machine Vision System for Online Monitoring and Quality Evaluation During Multi-Layer Multi-Pass Welding
Sensors · 12.08.2025 · 25 (16) · 4997
DOI: 10.3390/s25164997 ↗Kurz gefasst
Fachartikel in der Zeitschrift Sensors, online erschienen am 12.08.2025. Verfasst von Van Doi Truong und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical Engineering, Hanyang University, 55, Hanyangdaehak-ro, Sangnok-gu, Ansan-si 15588, Gyeonggi-do, Republic of Korea. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Research Foundation of Korea, Ministry of Trade, Industry and Energy, Korea Institute of Industrial Technology.
Abstract (Originalsprache)
Multi-layer multi-pass welding plays an important role in manufacturing industries such as nuclear power plants, pressure vessel manufacturing, and ship building. However, distortion or welding defects are still challenges; therefore, welding monitoring and quality control are essential tasks for the dynamic adjustment of execution during welding. The aim was to propose a machine vision system for monitoring and surface quality evaluation during multi-pass welding using a line scanner and infrared camera sensors. The cross-section modelling based on the line scanner data enabled the measurement of distortion and dynamic control of the welding plan. Lack of fusion, porosity, and burn-through defects were intentionally generated by controlling welding parameters to construct a defect inspection dataset. To reduce the influence of material surface colour, the proposed normal map approach combined with a deep learning approach was applied for inspecting the surface defects on each layer, achieving a mean average precision of 0.88. In addition to monitoring the temperature of the weld pool, a burn-through defect detection algorithm was introduced to track welding status. The whole system was integrated into a graphical user interface to visualize the welding progress. This work provides a solid foundation for monitoring and potential for the further development of the automatic adaptive welding system in multi-layer multi-pass welding.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Mechanical Engineering, Hanyang University, 55, Hanyangdaehak-ro, Sangnok-gu, Ansan-si 15588, Gyeonggi-do, Republic of Korea.
- BK21 FOUR ERICA-ACE Centre, Hanyang University, 55, Hanyangdaehak-ro, Sangnok-gu, Ansan-si 15588, Gyeonggi-do, Republic of Korea.
- Autonomous Manufacturing & Process R&D Department, Korea Institute of Industrial Technology, 143, Hanggaul-ro, Sangrok-gu, Ansan-si 15588, Gyeonggi-do, Republic of Korea.
ORCID-Profile: Jonghun Yoon
Förderung
- National Research Foundation of Korea
- Ministry of Trade, Industry and Energy
- Korea Institute of Industrial Technology
- National Research Foundation of Korea (NRF) grant funded by the Korea government (MSIT)
- Korea Institute of Industrial Technology as "RIAM Learning Factory Platform
- Korea Institute of Industrial Technology’s research project
Zitieren
APA
Truong, V. D., Wang, Y., Won, C., & Yoon, J. (2025). A Deep Learning-Based Machine Vision System for Online Monitoring and Quality Evaluation During Multi-Layer Multi-Pass Welding. Sensors, 25(16), 4997. https://doi.org/10.3390/s25164997
Vancouver
Truong VD, Wang Y, Won C, Yoon J. A Deep Learning-Based Machine Vision System for Online Monitoring and Quality Evaluation During Multi-Layer Multi-Pass Welding. Sensors. 2025;25(16):4997. doi:10.3390/s25164997
BibTeX
@article{Truong2025,
author = {Truong, Van Doi and Wang, Yunfeng and Won, Chanhee and Yoon, Jonghun},
title = {A Deep Learning-Based Machine Vision System for Online Monitoring and Quality Evaluation During Multi-Layer Multi-Pass Welding},
journal = {Sensors},
year = {2025},
volume = {25},
number = {16},
pages = {4997},
doi = {10.3390/s25164997}
}
EUVIMED