EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Data-Driven Fouling Detection in Refinery Preheat Train Heat Exchangers Using Neural Networks and Gradient Boosting

Željka Ujević Andrijić iD, Nikola Rimac

Sensors · 09.08.2025 · 25 (16) · 4936

DOI: 10.3390/s25164936 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 09.08.2025. Verfasst von Željka Ujević Andrijić und 1 weiteren Autor:innen. Beteiligte Einrichtung: Department of Measurements and Process Control, Faculty of Chemical Engineering and Technology, University of Zagreb, Savska c. 16/5A, 10000 Zagreb, …. Die Arbeit wurde bisher 16-mal zitiert (Crossref) und nennt 37 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Fouling detection in refinery crude distillation unit (CDU) preheat trains is essential for maintaining energy efficiency and operational reliability. This study presents a virtual sensing approach for fouling monitoring using data-driven and semi-empirical models. Specifically, Long Short-Term Memory (LSTM) neural networks, Extreme Gradient Boosting (XGB), and the ɛ-NTU method (effectiveness—Number of Transfer Units) were compared for predicting heat exchanger outlet temperatures, which serve as indicators of fouling. Models were trained on clean operational data to estimate baseline performance. A growing discrepancy between predicted and actual outlet temperatures over time indicated heat transfer degradation. Fouling resistance was calculated from the difference between predicted and actual heat transfer coefficients, enabling effectiveness loss assessment. The LSTM model showed high accuracy in capturing dynamic operational trends, while XGB provided a lightweight alternative with limited extrapolation capability under unfamiliar conditions. Both models outperformed the ɛ-NTU approach in fouling detection sensitivity. Inefficiencies from a single fouled exchanger were estimated to result in an additional 175 tons of CO2 emissions and an economic loss of approximately EUR 12,000 over two months. This study highlights the potential of AI-enabled virtual sensors for real-time fouling monitoring in industrial heat exchangers. Such tools can significantly enhance predictive maintenance strategies, improve energy efficiency, and reduce emissions.

Schlagwörter

Stichwörter der Autor:innen

fouling detectionheat efficiency CDUheat exchangermachine learningpreheat trainpreventive maintenance

Autor:innen und Institutionen

  • Department of Measurements and Process Control, Faculty of Chemical Engineering and Technology, University of Zagreb, Savska c. 16/5A, 10000 Zagreb, Croatia.

ORCID-Profile: Željka Ujević Andrijić

Zitieren

APA

Ujević Andrijić, Ž., & Rimac, N. (2025). Data-Driven Fouling Detection in Refinery Preheat Train Heat Exchangers Using Neural Networks and Gradient Boosting. Sensors, 25(16), 4936. https://doi.org/10.3390/s25164936

Vancouver

Ujević Andrijić Ž, Rimac N. Data-Driven Fouling Detection in Refinery Preheat Train Heat Exchangers Using Neural Networks and Gradient Boosting. Sensors. 2025;25(16):4936. doi:10.3390/s25164936

BibTeX
@article{UjeviAndriji2025,
  author = {Ujević Andrijić, Željka and Rimac, Nikola},
  title = {Data-Driven Fouling Detection in Refinery Preheat Train Heat Exchangers Using Neural Networks and Gradient Boosting},
  journal = {Sensors},
  year = {2025},
  volume = {25},
  number = {16},
  pages = {4936},
  doi = {10.3390/s25164936}
}
Kostenlos starten →