Digital Inspection Technology for Sheet Metal Parts Using 3D Point Clouds
Sensors · 06.08.2025 · 25 (15) · 4827
DOI: 10.3390/s25154827 ↗Kurz gefasst
Fachartikel in der Zeitschrift Sensors, online erschienen am 06.08.2025. Verfasst von Jian Guo und 4 weiteren Autor:innen. Beteiligte Einrichtung: College of Mechanical and Electrical Engineering, Harbin Engineering University, Harbin 150001, China. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 30 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Key Research and Development Project of Heilongjiang Province.
Abstract (Originalsprache)
To solve the low efficiency of traditional sheet metal measurement, this paper proposes a digital inspection method for sheet metal parts based on 3D point clouds. The 3D point cloud data of sheet metal parts are collected using a 3D laser scanner, and the topological relationship is established by using a K-dimensional tree (KD tree). The pass-through filtering method is adopted to denoise the point cloud data. To preserve the fine features of the parts, an improved voxel grid method is proposed for the downsampling of the point cloud data. Feature points are extracted via the intrinsic shape signatures (ISS) algorithm and described using the fast point feature histograms (FPFH) algorithm. After rough registration with the sample consensus initial alignment (SAC-IA) algorithm, an initial position is provided for fine registration. The improved iterative closest point (ICP) algorithm, used for fine registration, can enhance the registration accuracy and efficiency. The greedy projection triangulation algorithm optimized by moving least squares (MLS) smoothing ensures surface smoothness and geometric accuracy. The reconstructed 3D model is projected onto a 2D plane, and the actual dimensions of the parts are calculated based on the pixel values of the sheet metal parts and the conversion scale. Experimental results show that the measurement error of this inspection system for three sheet metal workpieces ranges from 0.1416 mm to 0.2684 mm, meeting the accuracy requirement of ±0.3 mm. This method provides a reliable digital inspection solution for sheet metal parts.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- College of Mechanical and Electrical Engineering, Harbin Engineering University, Harbin 150001, China.
ORCID-Profile: Jian Guo
Förderung
- Key Research and Development Project of Heilongjiang Province
Zitieren
APA
Guo, J., Tan, D., Guo, S., Chen, Z., & Liu, R. (2025). Digital Inspection Technology for Sheet Metal Parts Using 3D Point Clouds. Sensors, 25(15), 4827. https://doi.org/10.3390/s25154827
Vancouver
Guo J, Tan D, Guo S, Chen Z, Liu R. Digital Inspection Technology for Sheet Metal Parts Using 3D Point Clouds. Sensors. 2025;25(15):4827. doi:10.3390/s25154827
BibTeX
@article{Guo2025,
author = {Guo, Jian and Tan, Dingzhong and Guo, Shizhe and Chen, Zheng and Liu, Rang},
title = {Digital Inspection Technology for Sheet Metal Parts Using 3D Point Clouds},
journal = {Sensors},
year = {2025},
volume = {25},
number = {15},
pages = {4827},
doi = {10.3390/s25154827}
}
EUVIMED