Flexible Strain Sensor Based on PVA/Tannic Acid/Lithium Chloride Ionically Conductive Hydrogel with Excellent Sensing and Good Adhesive Properties
Sensors · 01.08.2025 · 25 (15) · 4765
DOI: 10.3390/s25154765 ↗Kurz gefasst
Fachartikel in der Zeitschrift Sensors, online erschienen am 01.08.2025. Verfasst von Xuanyu Pan und 5 weiteren Autor:innen. Beteiligte Einrichtung: Province Key Laboratory of Forestry Intelligent Equipment Engineering, College of Mechanical and Electrical Engineering, Northeast Forestry Universit…. Die Arbeit wurde bisher 15-mal zitiert (Crossref) und nennt 47 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Heilongjiang Province Postdoctoral Science Foundation Project, National Natural Science Foundation of China, China Postdoctoral Science Foundation Project.
Abstract (Originalsprache)
Ion-conductive-hydrogel strain sensors demonstrate broad application prospects in the fields of flexible sensing and bioelectric signal monitoring due to their excellent skin conformability and efficient signal transmission characteristics. However, traditional preparation methods face significant challenges in enhancing adhesion strength, conductivity, and mechanical stability. To address this issue, this study employed a freeze–thaw cycling method, using polyvinyl alcohol (PVA) as the matrix material, tannic acid (TA) as the adhesion reinforcement material, and lithium chloride (LiCl) as the conductive medium, successfully developing an ion-conductive hydrogel with superior comprehensive performance. Experimental data confirm that the PVA-TA-0.5/LiCl-1 hydrogel achieves optimal levels of adhesion strength (2.32 kPa on pigskin) and conductivity (0.64 S/m), while also exhibiting good tensile strength (0.1 MPa). Therefore, this hydrogel shows great potential for use in strain sensors, demonstrating excellent sensitivity (GF = 1.15), reliable operational stability, as the ΔR/R0 signal remains virtually unchanged after 2500 cycles of stretching, and outstanding strain sensing and electromyographic signal acquisition capabilities, fully highlighting its practical value in the fields of flexible sensing and bioelectric monitoring.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Province Key Laboratory of Forestry Intelligent Equipment Engineering, College of Mechanical and Electrical Engineering, Northeast Forestry University, Harbin 150040, China.
ORCID-Profile: Xuanyu Pan, Han Wu, Zhuangzhi Sun
Förderung
- Heilongjiang Province Postdoctoral Science Foundation Project
- National Natural Science Foundation of China
- China Postdoctoral Science Foundation Project
- Natural Science Foundation of Heilongjiang Province
- Fundamental Research Funds for the Central Universities
Zitieren
APA
Pan, X., Zhu, H., Qin, F., Jing, M., Wu, H., & Sun, Z. (2025). Flexible Strain Sensor Based on PVA/Tannic Acid/Lithium Chloride Ionically Conductive Hydrogel with Excellent Sensing and Good Adhesive Properties. Sensors, 25(15), 4765. https://doi.org/10.3390/s25154765
Vancouver
Pan X, Zhu H, Qin F, Jing M, Wu H, Sun Z. Flexible Strain Sensor Based on PVA/Tannic Acid/Lithium Chloride Ionically Conductive Hydrogel with Excellent Sensing and Good Adhesive Properties. Sensors. 2025;25(15):4765. doi:10.3390/s25154765
BibTeX
@article{Pan2025,
author = {Pan, Xuanyu and Zhu, Hongyuan and Qin, Fufei and Jing, Mingxing and Wu, Han and Sun, Zhuangzhi},
title = {Flexible Strain Sensor Based on PVA/Tannic Acid/Lithium Chloride Ionically Conductive Hydrogel with Excellent Sensing and Good Adhesive Properties},
journal = {Sensors},
year = {2025},
volume = {25},
number = {15},
pages = {4765},
doi = {10.3390/s25154765}
}
EUVIMED