EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Securing Biomechanical Data Quality: A Comprehensive Evaluation of On-Board Accelerometers for Shock and Vibration Analysis

Corentin Bosio, Christophe Sauret iD, Patricia Thoreux iD, Delphine Chadefaux iD

Sensors · 2025

DOI: 10.3390/s25154569 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, 2025. Verfasst von Corentin Bosio und 3 weiteren Autor:innen. Beteiligte Einrichtung: Arts et Métiers Institute of Technology, EPF Engineering School, Université Sorbonne Paris Nord, IBHGC-Institut de Biomécanique Humaine Georges Charp…. Hauptthemen laut MEDLINE: Accelerometry, Vibration. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Agence Nationale de la Recherche, French National Research Agency (ANR).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

(1) On-board accelerometers are increasingly employed in real-world biomechanics to monitor vibrations and shocks. This study assesses the accuracy, repeatability, and variability of three commercially available inertial measurement units (IMUs)—Xsens, Blue Trident, and Shimmer 3—in measuring vibration and shock parameters relevant to human motion analysis. (2) A controlled laboratory setup utilizing an electrodynamic shaker was employed to generate sine waves at varying frequencies and amplitudes, as well as shock profiles with defined peak accelerations and durations. (3) The results showed that Blue Trident demonstrated the highest accuracy in shock amplitude and timing, with relative errors below 6%, while Xsens provided stable measurements for low-frequency vibrations. In contrast, Shimmer 3 exhibited considerable variability in signal quality. (4) These findings offer critical insights into sensor selection based on specific application needs, ensuring optimal accuracy and reliability in dynamic measurement environments. This study lays the groundwork for improved IMU application in biomechanical research and practical deployments. Future research should continue to investigate sensor performance, particularly in angular motion contexts, to further enhance motion analysis capabilities.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

AccelerometryVibrationHumansBiomechanical PhenomenaData AccuracyAccelerationReproducibility of Results

Stichwörter der Autor:innen

accelerometermetrologyshockvibration

Autor:innen und Institutionen

  • Arts et Métiers Institute of Technology, EPF Engineering School, Université Sorbonne Paris Nord, IBHGC-Institut de Biomécanique Humaine Georges Charpak, F-75013 Paris, France.
  • Centre d'Etudes et de Recherche sur l'Appareillage des Handicapés, Institution Nationale des Invalides, F-75007 Paris, France.
  • Hôpital Hôtel-Dieu, AP-HP, F-75004 Paris, France.

ORCID-Profile: Christophe Sauret, Patricia Thoreux, Delphine Chadefaux

Förderung

  • Agence Nationale de la Recherche
  • French National Research Agency (ANR)

Zitieren

APA

Bosio, C., Sauret, C., Thoreux, P., & Chadefaux, D. (2025). Securing Biomechanical Data Quality: A Comprehensive Evaluation of On-Board Accelerometers for Shock and Vibration Analysis. Sensors. https://doi.org/10.3390/s25154569

Vancouver

Bosio C, Sauret C, Thoreux P, Chadefaux D. Securing Biomechanical Data Quality: A Comprehensive Evaluation of On-Board Accelerometers for Shock and Vibration Analysis. Sensors. 2025. doi:10.3390/s25154569

BibTeX
@article{Bosio2025,
  author = {Bosio, Corentin and Sauret, Christophe and Thoreux, Patricia and Chadefaux, Delphine},
  title = {Securing Biomechanical Data Quality: A Comprehensive Evaluation of On-Board Accelerometers for Shock and Vibration Analysis},
  journal = {Sensors},
  year = {2025},
  doi = {10.3390/s25154569}
}
Kostenlos starten →