Impedance Characterization and Modeling of Gold, Silver, and PEDOT:PSS Ultra-Thin Tattoo Electrodes for Wearable Bioelectronics
Sensors · 2025
DOI: 10.3390/s25154568 ↗Kurz gefasst
Fachartikel in der Zeitschrift Sensors, 2025. Verfasst von Antonello Mascia und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Electrical and Electronics Engineering, University of Cagliari, Piazza D'Armi, 09123 Cagliari, Italy. Hauptthemen laut MEDLINE: Wearable Electronic Devices, Silver, Gold, Bridged Bicyclo Compounds, Heterocyclic. Die Arbeit wurde bisher 11-mal zitiert (Crossref) und nennt 45 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: ‘Technologically Scalable 2D Materials and Extended Operando Measurement Methodologies for Advanced Device Fabrication’ 2D-EMMA project.
Abstract (Originalsprache)
This study presents a comprehensive evaluation and an equivalent circuit modeling of the skin–electrode impedance characteristics of three types of ultra-thin tattoo electrodes, all based on Parylene C nanofilms but with different active materials: Gold, Silver, and PEDOT:PSS. Their performance was compared to standard disposable Ag/AgCl electrodes. Impedance measurements were carried out on six human subjects under controlled conditions, assessing the frequency response in the range of 20 Hz to 1 kHz. For each subject, the impedance was recorded six times over one hour to investigate the stability and the temporal performance. The collected data were subsequently analyzed to model the electrical properties and interface behavior of each electrode type. The findings demonstrate that the tattoo electrodes offer impedance levels comparable to those of Ag/AgCl electrodes (in the order of tens of kΩ at 20 Hz), while providing additional benefits such as enhanced conformability, improved skin adhesion, and reduced skin irritation during use. Furthermore, the modeling of the skin–electrode interface through a more detailed equivalent circuit than the single time constant model enables a more detailed interface analysis and description, with fitting algorithm R2 scores of about 0.999 and 0.979 for the impedance magnitude and impedance phase, respectively. The proposed equivalent circuit offers valuable insights for optimizing electrode design, supporting the potential of Parylene C-based tattoo electrodes as promising alternatives for next-generation wearable bioelectronic applications.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- Department of Electrical and Electronics Engineering, University of Cagliari, Piazza D'Armi, 09123 Cagliari, Italy.
ORCID-Profile: Antonello Mascia, Riccardo Collu, Nasreddine Makni, Mattia Concas, Massimo Barbaro, Piero Cosseddu
Förderung
- ‘Technologically Scalable 2D Materials and Extended Operando Measurement Methodologies for Advanced Device Fabrication’ 2D-EMMA project
Zitieren
APA
Mascia, A., Collu, R., Makni, N., Concas, M., Barbaro, M., & Cosseddu, P. (2025). Impedance Characterization and Modeling of Gold, Silver, and PEDOT:PSS Ultra-Thin Tattoo Electrodes for Wearable Bioelectronics. Sensors. https://doi.org/10.3390/s25154568
Vancouver
Mascia A, Collu R, Makni N, Concas M, Barbaro M, Cosseddu P. Impedance Characterization and Modeling of Gold, Silver, and PEDOT:PSS Ultra-Thin Tattoo Electrodes for Wearable Bioelectronics. Sensors. 2025. doi:10.3390/s25154568
BibTeX
@article{Mascia2025,
author = {Mascia, Antonello and Collu, Riccardo and Makni, Nasreddine and Concas, Mattia and Barbaro, Massimo and Cosseddu, Piero},
title = {Impedance Characterization and Modeling of Gold, Silver, and PEDOT:PSS Ultra-Thin Tattoo Electrodes for Wearable Bioelectronics},
journal = {Sensors},
year = {2025},
doi = {10.3390/s25154568}
}
EUVIMED