EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A UNet++-Based Approach for Delamination Imaging in CFRP Laminates Using Full Wavefield

Yitian Yan, Kang Yang, Yaxun Gou, Zhifeng Tang iD, Fuzai Lv, Zhoumo Zeng, Jian Li, Yang Liu

Sensors · 09.07.2025 · 25 (14) · 4292

DOI: 10.3390/s25144292 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 09.07.2025. Verfasst von Yitian Yan und 7 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of Precision Measuring Technology and Instruments, Tianjin University, Tianjin 300072, China. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Natural Science Foundation of Zhejiang Province, National Science Foundation of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The timely detection of delamination is essential for preventing catastrophic failures and extending the service life of carbon fiber-reinforced polymers (CFRP). Full wavefields in CFRP encapsulate extensive information on the interaction between guided waves and structural damage, making them a widely utilized tool for damage mapping. However, due to the multimodal and dispersive nature of guided waves, interpreting full wavefields remains a significant challenge. This study proposes an end-to-end delamination imaging approach based on UNet++ using 2D frequency domain spectra (FDS) derived from full wavefield data. The proposed method is validated through a self-constructed simulation dataset, experimental data collected using Scanning Laser Doppler Vibrometry, and a publicly available dataset created by Kudela and Ijjeh. The results on the simulated data show that UNet++, trained with multi-frequency FDS, can accurately predict the location, shape, and size of delamination while effectively handling frequency offsets and noise interference in the input FDS. Experimental results further indicate that the model, trained exclusively on simulated data, can be directly applied to real-world scenarios, delivering artifact-free delamination imaging.

Schlagwörter

Stichwörter der Autor:innen

carbon fiber-reinforced plasticdeep learningdelaminationnon-destructive evaluationultrasonic guided wave

Autor:innen und Institutionen

  • State Key Laboratory of Precision Measuring Technology and Instruments, Tianjin University, Tianjin 300072, China.
  • Department of Electrical and Computer Engineering, University of Florida, Gainesville, FL 32611, USA.
  • Institute of Modern Manufacturing Engineering, Zhejiang University, Hangzhou 310058, China.

ORCID-Profile: Zhifeng Tang

Förderung

  • National Natural Science Foundation of China
  • Natural Science Foundation of Zhejiang Province
  • National Science Foundation of China

Zitieren

APA

Yan, Y., Yang, K., Gou, Y., Tang, Z., Lv, F., Zeng, Z., Li, J., & Liu, Y. (2025). A UNet++-Based Approach for Delamination Imaging in CFRP Laminates Using Full Wavefield. Sensors, 25(14), 4292. https://doi.org/10.3390/s25144292

Vancouver

Yan Y, Yang K, Gou Y, Tang Z, Lv F, Zeng Z, et al. A UNet++-Based Approach for Delamination Imaging in CFRP Laminates Using Full Wavefield. Sensors. 2025;25(14):4292. doi:10.3390/s25144292

BibTeX
@article{Yan2025,
  author = {Yan, Yitian and Yang, Kang and Gou, Yaxun and Tang, Zhifeng and Lv, Fuzai and Zeng, Zhoumo and Li, Jian and Liu, Yang},
  title = {A UNet++-Based Approach for Delamination Imaging in CFRP Laminates Using Full Wavefield},
  journal = {Sensors},
  year = {2025},
  volume = {25},
  number = {14},
  pages = {4292},
  doi = {10.3390/s25144292}
}
Kostenlos starten →