EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Research on Three-Axis Vibration Characteristics and Vehicle Axle Shape Identification of Cement Pavement Under Heavy Vehicle Loads Based on EMD–Energy Decoupling Method

Pengpeng Li, Linbing Wang, Songli Yang iD, Zhoujing Ye iD

Sensors · 30.06.2025 · 25 (13) · 4066

DOI: 10.3390/s25134066 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 30.06.2025. Verfasst von Pengpeng Li und 3 weiteren Autor:innen. Beteiligte Einrichtung: National Center for Materials Service Safety, University of Science and Technology Beijing, Beijing 100083, China. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 47 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Technology Innovation and Demonstration Project of the Department of Transport of Yunnan Province (2021).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The structural integrity of cement concrete pavements, paramount for ensuring traffic safety and operational efficiency, faces mounting challenges from the escalating burden of heavy-duty vehicular traffic. Precise characterisation of pavement dynamic responses under such conditions proves indispensable for implementing effective structural health monitoring and early warning system deployment. This investigation examines the triaxial dynamic response characteristics of cement concrete pavement subjected to low-speed, heavy-duty vehicular excitations, employing data acquired through in situ field measurements. A monitoring system incorporating embedded triaxial MEMS accelerometers was developed to capture vibration signals directly within the pavement structure. Raw data underwent preprocessing utilising a smoothing wavelet transform technique to attenuate noise, followed by empirical mode decomposition (EMD) and short-time energy (STE) analysis to scrutinise the time–frequency and energetic properties of triaxial vibration signals. The findings demonstrate that heavy, slow-moving vehicles generate substantial triaxial vibrations, with the vertical (Z-axis) response exhibiting the greatest amplitude and encompassing higher dominant frequency components compared to the horizontal (X and Y) axes. EMD successfully decomposed the complex signals into discrete intrinsic mode functions (IMFs), identifying high-frequency components (IMF1–IMF3) associated with transient vehicular impacts, mid-frequency components (IMF4–IMF6) presumably linked to structural and vehicle dynamics, and low-frequency components (IMF7–IMF9) representing system trends or ambient noise. The STE analysis of the selected IMFs elucidated the transient nature of axle loading, revealing pronounced, localised energy peaks. These findings furnish a comprehensive understanding of the dynamic behaviour of cement concrete pavements under heavy vehicle loads and establish a robust methodological framework for pavement performance assessment and refined axle load identification.

Schlagwörter

Stichwörter der Autor:innen

accelerationcement concrete pavementintercorrelation analysislow-speed heavy loadstriaxial signals

Autor:innen und Institutionen

  • National Center for Materials Service Safety, University of Science and Technology Beijing, Beijing 100083, China.
  • School of Environmental, Civil, Agricultural and Mechanical Engineering, College of Engineering, University of Georgia, Athens, GA 30602, USA.

ORCID-Profile: Songli Yang, Zhoujing Ye

Förderung

  • National Natural Science Foundation of China
  • Technology Innovation and Demonstration Project of the Department of Transport of Yunnan Province (2021)

Zitieren

APA

Li, P., Wang, L., Yang, S., & Ye, Z. (2025). Research on Three-Axis Vibration Characteristics and Vehicle Axle Shape Identification of Cement Pavement Under Heavy Vehicle Loads Based on EMD–Energy Decoupling Method. Sensors, 25(13), 4066. https://doi.org/10.3390/s25134066

Vancouver

Li P, Wang L, Yang S, Ye Z. Research on Three-Axis Vibration Characteristics and Vehicle Axle Shape Identification of Cement Pavement Under Heavy Vehicle Loads Based on EMD–Energy Decoupling Method. Sensors. 2025;25(13):4066. doi:10.3390/s25134066

BibTeX
@article{Li2025,
  author = {Li, Pengpeng and Wang, Linbing and Yang, Songli and Ye, Zhoujing},
  title = {Research on Three-Axis Vibration Characteristics and Vehicle Axle Shape Identification of Cement Pavement Under Heavy Vehicle Loads Based on EMD–Energy Decoupling Method},
  journal = {Sensors},
  year = {2025},
  volume = {25},
  number = {13},
  pages = {4066},
  doi = {10.3390/s25134066}
}
Kostenlos starten →