The Design and Development of a Low-Cost and Environmentally Friendly Voltage Divider for On-Site High-Voltage Calibration up to 850 kV
Sensors · 26.06.2025 · 25 (13) · 3964
DOI: 10.3390/s25133964 ↗Kurz gefasst
Fachartikel in der Zeitschrift Sensors, online erschienen am 26.06.2025. Verfasst von Mohamed Agazar und 4 weiteren Autor:innen. Beteiligte Einrichtung: LNE (Laboratoire National de Métrologie et d'Essais), 1 Rue Gaston Boissier, 75015 Paris, France. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 26 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Euramet, European Metrology Programme for Innovation and Research.
Abstract (Originalsprache)
This paper presents the design, development, and characterization of a low-cost and environmentally friendly high-voltage divider optimized for on-site calibration up to 850 kV. Unlike traditional dividers that rely on oil or SF6 for insulation, both of which pose environmental risk and regulation issues, the proposed system uses modular construction with commercial off-the-shelf components and natural air insulation, minimizing environmental impact and facilitating transport, calibration, and maintenance. Despite using air insulation, the divider demonstrates excellent uncertainty performance. Characterization results show frequency linearity better than 0.2% up to 100 kHz and a bandwidth exceeding 10 MHz, making it suitable for the measurement of a wide range of voltage types. Static and dynamic performance evaluations confirm reliable scale factor stability and low measurement uncertainty: 0.01% for DC (550 kV), 0.3% for AC (405 kV), and 0.7% for impulses such as 1.2/50 µs (850 kV). The system offers a practical and sustainable solution for high-voltage measurements, meeting growing industrial and European environmental demands.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- LNE (Laboratoire National de Métrologie et d'Essais), 1 Rue Gaston Boissier, 75015 Paris, France.
ORCID-Profile: Mohamed Agazar, Hanane Saadeddine, Mohamed Ouameur
Förderung
- Euramet
- European Metrology Programme for Innovation and Research
Zitieren
APA
Agazar, M., Saadeddine, H., Dougdag, K., Ouameur, M., & Azzoug, M. (2025). The Design and Development of a Low-Cost and Environmentally Friendly Voltage Divider for On-Site High-Voltage Calibration up to 850 kV. Sensors, 25(13), 3964. https://doi.org/10.3390/s25133964
Vancouver
Agazar M, Saadeddine H, Dougdag K, Ouameur M, Azzoug M. The Design and Development of a Low-Cost and Environmentally Friendly Voltage Divider for On-Site High-Voltage Calibration up to 850 kV. Sensors. 2025;25(13):3964. doi:10.3390/s25133964
BibTeX
@article{Agazar2025,
author = {Agazar, Mohamed and Saadeddine, Hanane and Dougdag, Kamel and Ouameur, Mohamed and Azzoug, Massinissa},
title = {The Design and Development of a Low-Cost and Environmentally Friendly Voltage Divider for On-Site High-Voltage Calibration up to 850 kV},
journal = {Sensors},
year = {2025},
volume = {25},
number = {13},
pages = {3964},
doi = {10.3390/s25133964}
}
EUVIMED