EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Validation of a Low-Cost Open-Ended Coaxial Probe Setup for Broadband Permittivity Measurements up to 6 GHz

Julia Arias-Rodríguez iD, Raúl Moreno-Merín iD, Andrea Martínez-Lozano iD, Germán Torregrosa-Penalva iD, Ernesto Ávila-Navarro iD

Sensors · 24.06.2025 · 25 (13) · 3935

DOI: 10.3390/s25133935 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 24.06.2025. Verfasst von Julia Arias-Rodríguez und 4 weiteren Autor:innen. Beteiligte Einrichtung: Elche Microwave Laboratory (EMwLab), Engineering Research Institute of Elche (I3E), Miguel Hernández University of Elche, 03202 Elche, Spain. Die Arbeit wurde bisher 11-mal zitiert (Crossref) und nennt 56 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Spanish State Research Agency (AEI), Conselleria de Educación, Universidades y Empleo de la Generalitat Valenciana.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This work presents the validation of a low-cost measurement system based on an open-ended coaxial SMA (SubMiniature version A) probe for the characterization of complex permittivity in the microwave frequency range. The system combines a custom-fabricated probe, a vector network analyzer, and a dedicated software application that implements three analytical models: capacitive, radiation, and virtual transmission line models. A comprehensive experimental campaign was carried out involving pure polar liquids, saline solutions, and biological tissues, with the measurements compared against those obtained using a high-precision commercial probe. The results confirm that the proposed system is capable of delivering accurate and reproducible permittivity values up to at least 6 GHz. Among the implemented models, the radiation model demonstrated the best overall performance, particularly in biological samples. Additionally, reproducibility tests with three independently assembled SMA probes showed normalized deviations below 3%, confirming the robustness of the design. These results demonstrate that the proposed system constitutes a viable alternative for cost-sensitive applications requiring portable or scalable microwave dielectric characterization.

Schlagwörter

Stichwörter der Autor:innen

SMA-based dielectric sensorcalibrationcomplex permittivitydielectric spectroscopylow-cost systemmicrowave measurementopen-ended coaxial probereproducibility

Autor:innen und Institutionen

  • Elche Microwave Laboratory (EMwLab), Engineering Research Institute of Elche (I3E), Miguel Hernández University of Elche, 03202 Elche, Spain.

ORCID-Profile: Julia Arias-Rodríguez, Raúl Moreno-Merín, Andrea Martínez-Lozano, Germán Torregrosa-Penalva, Ernesto Ávila-Navarro

Förderung

  • Spanish State Research Agency (AEI)
  • Conselleria de Educación, Universidades y Empleo de la Generalitat Valenciana

Zitieren

APA

Arias-Rodríguez, J., Moreno-Merín, R., Martínez-Lozano, A., Torregrosa-Penalva, G., & Ávila-Navarro, E. (2025). Validation of a Low-Cost Open-Ended Coaxial Probe Setup for Broadband Permittivity Measurements up to 6 GHz. Sensors, 25(13), 3935. https://doi.org/10.3390/s25133935

Vancouver

Arias-Rodríguez J, Moreno-Merín R, Martínez-Lozano A, Torregrosa-Penalva G, Ávila-Navarro E. Validation of a Low-Cost Open-Ended Coaxial Probe Setup for Broadband Permittivity Measurements up to 6 GHz. Sensors. 2025;25(13):3935. doi:10.3390/s25133935

BibTeX
@article{AriasRodrguez2025,
  author = {Arias-Rodríguez, Julia and Moreno-Merín, Raúl and Martínez-Lozano, Andrea and Torregrosa-Penalva, Germán and Ávila-Navarro, Ernesto},
  title = {Validation of a Low-Cost Open-Ended Coaxial Probe Setup for Broadband Permittivity Measurements up to 6 GHz},
  journal = {Sensors},
  year = {2025},
  volume = {25},
  number = {13},
  pages = {3935},
  doi = {10.3390/s25133935}
}
Kostenlos starten →