EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Quality Assessment of High-Speed Motion Blur Images for Mobile Automated Tunnel Inspection

Chulhee Lee iD, Donggyou Kim, Dongku Kim

Sensors · 18.06.2025 · 25 (12) · 3804

DOI: 10.3390/s25123804 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 18.06.2025. Verfasst von Chulhee Lee und 2 weiteren Autor:innen. Beteiligte Einrichtung: Department of Geotechnical Engineering Research, Korea Institute of Civil Engineering and Building Technology (KICT), Goyang 10223, Republic of Korea. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 100 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Korea Agency for Infrastructure Technology Advancement.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study quantitatively evaluates the impact of motion blur—caused by high-speed movement—on image quality in a mobile tunnel scanning system (MTSS). To simulate movement at speeds of up to 70 km/h, a high-speed translational motion panel was developed. Images were captured under conditions compliant with the ISO 12233 international standard, and image quality was assessed using two metrics: blurred edge width (BEW) and the spatial frequency response at 50% contrast (MTF50). Experiments were conducted under varying shutter speeds, lighting conditions (15,000 lx and 40,000 lx), and motion speeds. The results demonstrated that increased motion speed increased BEW and decreased MTF50, indicating greater blur intensity and reduced image sharpness. Two-way analysis of variance and t-tests confirmed that shutter and motion speed significantly affected image quality. Although higher illumination levels partially improved, they also occasionally led to reduced sharpness. Field validation using MTSS in actual tunnel environments demonstrated that BEW and MTF50 effectively captured blur variations by scanning direction. This study proposes BEW and MTF50 as reliable indicators for quantitatively evaluating motion blur in tunnel inspection imagery and suggests their potential to optimize MTSS operation and improve the accuracy of automated defect detection.

Schlagwörter

Stichwörter der Autor:innen

blurred edge widthhigh-speed motion blur imagesimage quality assessmentmobile tunnel scanning systemmodulation transfer function

Autor:innen und Institutionen

  • Department of Geotechnical Engineering Research, Korea Institute of Civil Engineering and Building Technology (KICT), Goyang 10223, Republic of Korea.

ORCID-Profile: Chulhee Lee

Förderung

  • Korea Agency for Infrastructure Technology Advancement

Zitieren

APA

Lee, C., Kim, D., & Kim, D. (2025). Quality Assessment of High-Speed Motion Blur Images for Mobile Automated Tunnel Inspection. Sensors, 25(12), 3804. https://doi.org/10.3390/s25123804

Vancouver

Lee C, Kim D, Kim D. Quality Assessment of High-Speed Motion Blur Images for Mobile Automated Tunnel Inspection. Sensors. 2025;25(12):3804. doi:10.3390/s25123804

BibTeX
@article{Lee2025,
  author = {Lee, Chulhee and Kim, Donggyou and Kim, Dongku},
  title = {Quality Assessment of High-Speed Motion Blur Images for Mobile Automated Tunnel Inspection},
  journal = {Sensors},
  year = {2025},
  volume = {25},
  number = {12},
  pages = {3804},
  doi = {10.3390/s25123804}
}
Kostenlos starten →