Research on Bearing Fault Diagnosis Method for Varying Operating Conditions Based on Spatiotemporal Feature Fusion
Sensors · 17.06.2025 · 25 (12) · 3789
DOI: 10.3390/s25123789 ↗Kurz gefasst
Fachartikel in der Zeitschrift Sensors, online erschienen am 17.06.2025. Verfasst von Jin Wang und 5 weiteren Autor:innen. Beteiligte Einrichtung: School of Electronic Information, Sichuan University, Chengdu 610065, China. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 39 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: State Key Laboratory of Advanced Nuclear Energy Technology, Nuclear Power Institute of China.
Abstract (Originalsprache)
In real-world scenarios, the rotational speed of bearings is variable. Due to changes in operating conditions, the feature distribution of bearing vibration data becomes inconsistent, which leads to the inability to directly apply the training model built under one operating condition (source domain) to another condition (target domain). Furthermore, the lack of sufficient labeled data in the target domain further complicates fault diagnosis under varying operating conditions. To address this issue, this paper proposes a spatiotemporal feature fusion domain-adaptive network (STFDAN) framework for bearing fault diagnosis under varying operating conditions. The framework constructs a feature extraction and domain adaptation network based on a parallel architecture, designed to capture the complex dynamic characteristics of vibration signals. First, the Fast Fourier Transform (FFT) and Variational Mode Decomposition (VMD) are used to extract the spectral and modal features of the signals, generating a joint representation with multi-level information. Then, a parallel processing mechanism of the Convolutional Neural Network (SECNN) based on the Squeeze-and-Excitation module and the Bidirectional Long Short-Term Memory network (BiLSTM) is employed to dynamically adjust weights, capturing high-dimensional spatiotemporal features. The cross-attention mechanism enables the interaction and fusion of spatial and temporal features, significantly enhancing the complementarity and coupling of the feature representations. Finally, a Multi-Kernel Maximum Mean Discrepancy (MKMMD) is introduced to align the feature distributions between the source and target domains, enabling efficient fault diagnosis under varying bearing conditions. The proposed STFDAN framework is evaluated using bearing datasets from Case Western Reserve University (CWRU), Jiangnan University (JNU), and Southeast University (SEU). Experimental results demonstrate that STFDAN achieves high diagnostic accuracy across different load conditions and effectively solves the bearing fault diagnosis problem under varying operating conditions.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Electronic Information, Sichuan University, Chengdu 610065, China.
- National Key Laboratory of Science and Technology on Reactor System Design Technology, Nuclear Power Institute of China, Chengdu 610213, China.
ORCID-Profile: Yan Wang, Xinzhi Zhou
Förderung
- State Key Laboratory of Advanced Nuclear Energy Technology, Nuclear Power Institute of China
Zitieren
APA
Wang, J., Wang, Y., Yu, J., Li, Q., Wang, H., & Zhou, X. (2025). Research on Bearing Fault Diagnosis Method for Varying Operating Conditions Based on Spatiotemporal Feature Fusion. Sensors, 25(12), 3789. https://doi.org/10.3390/s25123789
Vancouver
Wang J, Wang Y, Yu J, Li Q, Wang H, Zhou X. Research on Bearing Fault Diagnosis Method for Varying Operating Conditions Based on Spatiotemporal Feature Fusion. Sensors. 2025;25(12):3789. doi:10.3390/s25123789
BibTeX
@article{Wang2025,
author = {Wang, Jin and Wang, Yan and Yu, Junhui and Li, Qingping and Wang, Hailin and Zhou, Xinzhi},
title = {Research on Bearing Fault Diagnosis Method for Varying Operating Conditions Based on Spatiotemporal Feature Fusion},
journal = {Sensors},
year = {2025},
volume = {25},
number = {12},
pages = {3789},
doi = {10.3390/s25123789}
}
EUVIMED