EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Improved Variational Mode Decomposition Based on Scale Space Representation for Fault Diagnosis of Rolling Bearings

Baoxiang Wang, Guoqing Liu, Jihai Dai, Chuancang Ding iD

Sensors · 04.06.2025 · 25 (11) · 3542

DOI: 10.3390/s25113542 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 04.06.2025. Verfasst von Baoxiang Wang und 3 weiteren Autor:innen. Beteiligte Einrichtung: School of Mechanical Engineering, Suzhou University of Science and Technology, Suzhou 215009, China. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, open project of the State Key Laboratory of Mechanical Transmission for Advanced Equipment, open project of the Intelligent Urban Rail Engineering Research Center of Jiangsu Province.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Accurate extraction of weak fault information from non-stationary vibration signals collected by vibration sensors is challenging due to severe noise and interference. While variational mode decomposition (VMD) has been effective in fault diagnosis, its reliance on predefined parameters, such as center frequencies and mode number, limits its adaptability and performance across different signal characteristics. To address these limitations, this paper proposes an improved variational mode decomposition (IVMD) method that enhances diagnostic performance by adaptively determining key parameters based on scale space representation. In concrete, the approach constructs a scale space by computing the inner product between the signal’s Fourier spectrum and a Gaussian function, and then identifies both the mode number and initial center frequencies through peak detection, ensuring more accurate and stable decomposition. Moreover, a multipoint kurtosis (MKurt) criterion is further employed to identify fault-relevant components, which are then merged to suppress redundancy and enhance diagnostic clarity. Experimental validation on locomotive bearings with inner race faults and compound faults demonstrates that IVMD outperforms conventional VMD by effectively extracting fault features obscured by noise. The results confirm the robustness and adaptability of IVMD, making it a promising tool for fault diagnosis in complex industrial environments.

Schlagwörter

Stichwörter der Autor:innen

fault diagnosisimproved variational mode decompositionmultipoint kurtosisrolling bearingsscale space representationvibration analysis

Autor:innen und Institutionen

  • School of Mechanical Engineering, Suzhou University of Science and Technology, Suzhou 215009, China.
  • School of Rail Transportation, Intelligent Urban Rail Engineering Research Center of Jiangsu Province, Soochow University, Suzhou 215131, China.
  • State Key Laboratory of Mechanical Transmission for Advanced Equipment, Chongqing University, Chongqing 400044, China.

ORCID-Profile: Chuancang Ding

Förderung

  • National Natural Science Foundation of China
  • open project of the State Key Laboratory of Mechanical Transmission for Advanced Equipment
  • open project of the Intelligent Urban Rail Engineering Research Center of Jiangsu Province
  • Natural Science Foundation of Jiangsu Province

Zitieren

APA

Wang, B., Liu, G., Dai, J., & Ding, C. (2025). Improved Variational Mode Decomposition Based on Scale Space Representation for Fault Diagnosis of Rolling Bearings. Sensors, 25(11), 3542. https://doi.org/10.3390/s25113542

Vancouver

Wang B, Liu G, Dai J, Ding C. Improved Variational Mode Decomposition Based on Scale Space Representation for Fault Diagnosis of Rolling Bearings. Sensors. 2025;25(11):3542. doi:10.3390/s25113542

BibTeX
@article{Wang2025,
  author = {Wang, Baoxiang and Liu, Guoqing and Dai, Jihai and Ding, Chuancang},
  title = {Improved Variational Mode Decomposition Based on Scale Space Representation for Fault Diagnosis of Rolling Bearings},
  journal = {Sensors},
  year = {2025},
  volume = {25},
  number = {11},
  pages = {3542},
  doi = {10.3390/s25113542}
}
Kostenlos starten →