EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Safety Status Monitoring of Operational Rock Bolts in Mining Roadways Under Mining-Induced Effects

Jianjun Dong iD, Wenduo Ding, Yu Qin, Ke Gao iD

Sensors · 31.05.2025 · 25 (11) · 3486

DOI: 10.3390/s25113486 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 31.05.2025. Verfasst von Jianjun Dong und 3 weiteren Autor:innen. Beteiligte Einrichtung: College of Safety Science and Engineering, Liaoning Technical University, Huludao 125105, China. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 24 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Natural Science Foundation of Liaoning Province of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study focuses on the importance of the real-time monitoring of bolt loads in roadways affected by high-intensity mining and the limitations of conventional monitoring methods. Fiber Bragg grating (FBG) sensors were embedded and encapsulated in rock bolts, and tensile tests were conducted indoors to verify their feasibility. The research was conducted using the consolidated face of the Bultai Coal Mine in the Shendong Mining Area as the engineering background. Real-time monitoring wavelength data from the FBG bolt sensor were obtained through field tests. The analysis of the data aimed to assess the condition of the FBG sensor and variations in axial force within the service bolts of the mining roadway. Using these monitoring results, the real-time stability and safety of the roadway bolts were evaluated. The study indicates that as the working face advances, the axial force in the bolt progressively rises under the effect of mine pressure. The left gang bolt rod’s shaft force changes significantly, while the right gang’s change is relatively small. When the working face moves 60 m past the bolt rod, the axial force in the bolt rises sharply. Moreover, the axial force at different positions of the left and right gang bolts exhibits a distinct variation pattern. The real-time monitoring of bolt support in the return roadway provides essential data for assessing bolt safety.

Schlagwörter

Stichwörter der Autor:innen

mining roadwaysmining-induced effectsrock boltssafety state monitoring

Autor:innen und Institutionen

  • College of Safety Science and Engineering, Liaoning Technical University, Huludao 125105, China.
  • Key Laboratory of Mine Thermodynamic Disasters and Control of Ministry of Education, Liaoning Technical University, Huludao 125105, China.

ORCID-Profile: Jianjun Dong, Ke Gao

Förderung

  • National Natural Science Foundation of China
  • Natural Science Foundation of Liaoning Province of China

Zitieren

APA

Dong, J., Ding, W., Qin, Y., & Gao, K. (2025). Safety Status Monitoring of Operational Rock Bolts in Mining Roadways Under Mining-Induced Effects. Sensors, 25(11), 3486. https://doi.org/10.3390/s25113486

Vancouver

Dong J, Ding W, Qin Y, Gao K. Safety Status Monitoring of Operational Rock Bolts in Mining Roadways Under Mining-Induced Effects. Sensors. 2025;25(11):3486. doi:10.3390/s25113486

BibTeX
@article{Dong2025,
  author = {Dong, Jianjun and Ding, Wenduo and Qin, Yu and Gao, Ke},
  title = {Safety Status Monitoring of Operational Rock Bolts in Mining Roadways Under Mining-Induced Effects},
  journal = {Sensors},
  year = {2025},
  volume = {25},
  number = {11},
  pages = {3486},
  doi = {10.3390/s25113486}
}
Kostenlos starten →