In Situ Evaluation of the Self-Heating Effect in Resistance Temperature Sensors
Sensors · 27.05.2025 · 25 (11) · 3374
DOI: 10.3390/s25113374 ↗Kurz gefasst
Fachartikel in der Zeitschrift Sensors, online erschienen am 27.05.2025. Verfasst von Przemysław Otomański und 2 weiteren Autor:innen. Beteiligte Einrichtung: Institute of Electrical Engineering and Electronics, Faculty of Control, Robotics and Electrical Engineering, Poznan University of Technology, Piotro…. Die Arbeit wurde bisher 13-mal zitiert (Crossref) und nennt 30 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
This paper discusses the issue of the self-heating effect of resistance sensors during temperature measurement. The self-heating effect causes temperature measurement errors. The aim of this work was to develop a method for in situ assessment of the thermal resistance between a self-heating thermometer and its surrounding environment, the temperature of which is measured. The proposed method is used to assess the uncertainty resulting from the heat transfer from the thermometer to the surrounding environment, which allows increased measurement accuracy. The proposed method consists of experimental determination of the sensor’s temperature characteristics in relation to the heating power for different values of the measuring current. Sample measurements were carried out on a representative group of resistance temperature sensors. The relationship of the internal thermal resistance to the type of sensor design and the relationship of the external resistance to the ambient conditions were demonstrated. The developed method allows the appropriate measuring current of the resistance temperature sensor to be selected according to its design, the mounting method, and the environmental conditions, which ensures that measurement errors are maintained at an appropriately low level.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Institute of Electrical Engineering and Electronics, Faculty of Control, Robotics and Electrical Engineering, Poznan University of Technology, Piotrowo Street 3A, 60-965 Poznan, Poland.
- Department of Automation and Metrology, Faculty of Electrical Engineering and Computer Science, Lublin University of Technology, Nadbystrzycka Street 38A, 20-618 Lublin, Poland.
- Department of Metrology and Measurement Systems, Faculty of Electrical and Computer Engineering, Rzeszow University of Technology, W. Pola Street 2, 35-959 Rzeszow, Poland.
ORCID-Profile: Przemysław Otomański, Eligiusz Pawłowski, Anna Szlachta
Zitieren
APA
Otomański, P., Pawłowski, E., & Szlachta, A. (2025). In Situ Evaluation of the Self-Heating Effect in Resistance Temperature Sensors. Sensors, 25(11), 3374. https://doi.org/10.3390/s25113374
Vancouver
Otomański P, Pawłowski E, Szlachta A. In Situ Evaluation of the Self-Heating Effect in Resistance Temperature Sensors. Sensors. 2025;25(11):3374. doi:10.3390/s25113374
BibTeX
@article{Otomaski2025,
author = {Otomański, Przemysław and Pawłowski, Eligiusz and Szlachta, Anna},
title = {In Situ Evaluation of the Self-Heating Effect in Resistance Temperature Sensors},
journal = {Sensors},
year = {2025},
volume = {25},
number = {11},
pages = {3374},
doi = {10.3390/s25113374}
}
EUVIMED