EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Development of Cortisol Sensors with Interdigitated Electrode Platforms Based on Barium Titanate Nanoparticles

Marylene S G Roma, Juliano A Chaker

Sensors · 26.05.2025 · 25 (11) · 3346

DOI: 10.3390/s25113346 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 26.05.2025. Verfasst von Marylene S G Roma und 1 weiteren Autor:innen. Beteiligte Einrichtung: Federal Institute of Brasilia, Ceilândia Campus, Brasília 72220-900, DF, Brazil. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 16 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: University of Brasilia, FAFDF.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Cortisol is a key biomarker for stress detection, and its levels can be monitored using point-of-care devices with sensors such as nanoparticles and interdigitated array electrodes (IDEs). This study developed an IDE platform using barium titanate (BaTiO3) particles synthesized via colloidal precipitation with titanium tetraisopropoxide, barium chloride, and Pluronic® P123. The calcination temperatures varied between 160 °C and 340 °C, with optimal results observed at 160 °C. Scanning electron microscopy revealed particles with an average size of 26 nm, and Fourier transform infrared spectroscopy confirmed the molecular composition after the removal of P123. X-ray diffraction analysis revealed anatase and brookite phases. Brunauer-Emmett-Teller analysis indicated changes in pore morphology, with samples treated at 160 °C exhibiting a type IV(a) mesoporous structure, a surface area of 163 m2/g, and an average pore diameter of 5.24 nm. Higher temperatures led to transitions to type IV(b) at 260 °C and type V at 340 °C, with reduced pore size. Electrochemical impedance spectroscopy was employed to evaluate the performance of the IDE sensor integrated with BaTiO3 nanoparticles and albumin across cortisol concentrations ranging from 5.0 to 20 ng/mL. Impedance measurements revealed a significant decrease in impedance (Z′) with increasing cortisol concentrations, indicating increased conductivity. Specifically, Nyquist plots for a saliva sample containing 5 ng/mL cortisol—within the typical physiological range—exhibited a marked increase in charge-transfer resistance (Rct), confirming the sensor’s ability to detect low hormone levels in biological fluids. These findings underscore the potential of BaTiO3-based IDE platforms at 160 °C for stress biomarker monitoring.

Schlagwörter

Stichwörter der Autor:innen

BETbarium titanate nanoparticlesbiosensorelectrochemical impedance spectroscopyinterdigitated electrode

Autor:innen und Institutionen

  • Federal Institute of Brasilia, Ceilândia Campus, Brasília 72220-900, DF, Brazil.
  • Department of Biomedical Equipment Technician, University of Brasília, Ceilândia Campus, Brasília 72220-900, DF, Brazil.
  • Laboratory of Nanoscience and Nanotechnology, University of Brasília, Ceilândia Campus, Brasília 72220-900, DF, Brazil.

Förderung

  • University of Brasilia
  • FAFDF

Zitieren

APA

Roma, M. S. G., & Chaker, J. A. (2025). Development of Cortisol Sensors with Interdigitated Electrode Platforms Based on Barium Titanate Nanoparticles. Sensors, 25(11), 3346. https://doi.org/10.3390/s25113346

Vancouver

Roma MSG, Chaker JA. Development of Cortisol Sensors with Interdigitated Electrode Platforms Based on Barium Titanate Nanoparticles. Sensors. 2025;25(11):3346. doi:10.3390/s25113346

BibTeX
@article{Roma2025,
  author = {Roma, Marylene S G and Chaker, Juliano A},
  title = {Development of Cortisol Sensors with Interdigitated Electrode Platforms Based on Barium Titanate Nanoparticles},
  journal = {Sensors},
  year = {2025},
  volume = {25},
  number = {11},
  pages = {3346},
  doi = {10.3390/s25113346}
}
Kostenlos starten →