EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Synthetic Tactile Sensor for Macroscopic Roughness Estimation Based on Spatial-Coding Contact Processing

Muhammad Irwan Yanwari iD, Shogo Okamoto iD

Sensors · 2025

DOI: 10.3390/s25082598 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, 2025. Verfasst von Muhammad Irwan Yanwari und 1 weiteren Autor:innen. Beteiligte Einrichtung: Department of Computer Science, Tokyo Metropolitan University, Hino 1910065, Japan. Hauptthemen laut MEDLINE: Touch, Touch Perception. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 82 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Suzuki Foundation.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Traditional tactile sensors primarily measure macroscopic surface features but do not directly estimate how humans perceive such surface roughness. Sensors that mimic human tactile processing could bridge this gap. This study proposes a method for predicting macroscopic roughness perception based on a sensing principle that closely resembles human tactile information processing. Humans are believed to assess macroscopic roughness based on the spatial distribution of subcutaneous deformation and resultant neural activities when touching a textured surface. To replicate this spatial-coding mechanism, we captured distributed contact information using a camera through a flexible, transparent material with fingerprint-like surface structures, simulating finger skin. Images were recorded under varying contact forces ranging from 1 N to 3 N. The spatial frequency components in the range of 0.1–1.0 mm−1 were extracted from these contact images, and a linear combination of these components was used to approximate human roughness perception recorded via the magnitude estimation method. The results indicate that for roughness specimens with rectangular or circular protrusions of surface wavelengths between 2 and 5 mm, the estimated roughness values achieved an average error comparable to the standard deviation of participants’ roughness ratings. These findings demonstrate the potential of macroscopic roughness estimation based on human-like tactile information processing and highlight the viability of vision-based sensing in replicating human roughness perception.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

TouchTouch PerceptionHumansSurface PropertiesFingers

Stichwörter der Autor:innen

PLS regressionmacroscopic surface texturespatial frequency

Autor:innen und Institutionen

  • Department of Computer Science, Tokyo Metropolitan University, Hino 1910065, Japan.
  • Department of Electrical Engineering, Politeknik Negeri Semarang, Kota Semarang 50275, Indonesia.

ORCID-Profile: Muhammad Irwan Yanwari, Shogo Okamoto

Förderung

  • Suzuki Foundation

Zitieren

APA

Yanwari, M. I., & Okamoto, S. (2025). Synthetic Tactile Sensor for Macroscopic Roughness Estimation Based on Spatial-Coding Contact Processing. Sensors. https://doi.org/10.3390/s25082598

Vancouver

Yanwari MI, Okamoto S. Synthetic Tactile Sensor for Macroscopic Roughness Estimation Based on Spatial-Coding Contact Processing. Sensors. 2025. doi:10.3390/s25082598

BibTeX
@article{Yanwari2025,
  author = {Yanwari, Muhammad Irwan and Okamoto, Shogo},
  title = {Synthetic Tactile Sensor for Macroscopic Roughness Estimation Based on Spatial-Coding Contact Processing},
  journal = {Sensors},
  year = {2025},
  doi = {10.3390/s25082598}
}
Kostenlos starten →