The Impact of Probe Angle and Swivel Length on Contact Point Identification in Coordinate Measuring Machine Measurements: A Case Study
Sensors · 23.03.2025 · 25 (7) · 2008
DOI: 10.3390/s25072008 ↗Kurz gefasst
Fachartikel in der Zeitschrift Sensors, online erschienen am 23.03.2025. Verfasst von Tomasz Mazur und 4 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Mechanical Engineering, Casimir Pulaski Radom University, ul. Stasieckiego 54, 26-600 Radom, Poland. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 39 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
This paper presents the results of investigations on the accuracy of contact point identification during coordinate measurement, which is crucial in the context of the Industry 4.0 concept. In particular, the effects of swivel length and probe declination angle during measurement were analyzed. In the experiments, deviations from the expected coordinates (0,0,0) of the contact point were analyzed for different rotational angles of the probing head. It was found that the recommended vertical positioning of the stylus at an angle of A = 0° might have introduced some insignificant errors. Increasing angle A up to 15° generated additional errors of negligible values in comparison with the measurement accuracy of the CMM. However, an increase in angle A up to 90° introduced additional errors as high as 10 μm. This contact point identification error will have a certain effect on the best fitting element and subsequent calculations and on the respective measurement results.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Faculty of Mechanical Engineering, Casimir Pulaski Radom University, ul. Stasieckiego 54, 26-600 Radom, Poland.
- Mitutoyo Polska Sp. z o.o., ul. Graniczna 8A, 54-610 Wrocław, Poland.
- Faculty of Production Engineering, University of Life Sciences in Lublin, Gleboka 28, 20-612 Lublin, Poland.
- Institute of Mechanical Science, Vilnius Gediminas Technical University, Sauletekio al. 11, LT-10223 Vilnius, Lithuania.
ORCID-Profile: Tomasz Mazur, Waldemar Samociuk, Miroslaw Rucki
Zitieren
APA
Mazur, T., Szymanski, T., Samociuk, W., Rucki, M., & Ryba, T. (2025). The Impact of Probe Angle and Swivel Length on Contact Point Identification in Coordinate Measuring Machine Measurements: A Case Study. Sensors, 25(7), 2008. https://doi.org/10.3390/s25072008
Vancouver
Mazur T, Szymanski T, Samociuk W, Rucki M, Ryba T. The Impact of Probe Angle and Swivel Length on Contact Point Identification in Coordinate Measuring Machine Measurements: A Case Study. Sensors. 2025;25(7):2008. doi:10.3390/s25072008
BibTeX
@article{Mazur2025,
author = {Mazur, Tomasz and Szymanski, Tomasz and Samociuk, Waldemar and Rucki, Miroslaw and Ryba, Tomasz},
title = {The Impact of Probe Angle and Swivel Length on Contact Point Identification in Coordinate Measuring Machine Measurements: A Case Study},
journal = {Sensors},
year = {2025},
volume = {25},
number = {7},
pages = {2008},
doi = {10.3390/s25072008}
}
EUVIMED