EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Designing an Adaptive Underwater Visible Light Communication System

Sana Rehman iD, Yue Rong iD, Peng Chen iD

Sensors · 14.03.2025 · 25 (6) · 1801

DOI: 10.3390/s25061801 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 14.03.2025. Verfasst von Sana Rehman und 2 weiteren Autor:innen. Beteiligte Einrichtung: School of Electrical Engineering, Computing and Mathematical Sciences (EECMS), Curtin University, Kent Street, Bentley, WA 6102, Australia. Die Arbeit wurde bisher 14-mal zitiert (Crossref) und nennt 33 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The Internet of Underwater Things (IoUT) has attracted significant attention from researchers due to the fact that seventy percent of the Earth’s surface is covered by water. Reliable underwater communication is the enabler of IoUT. Different carriers, such as electromagnetic waves, sound, and light, are used to transmit data through the water. Among these, optical waves are considered promising due to their high data rates and relatively good bandwidth efficiency, as water becomes transparent to light in the visible spectrum (400–700 nm). However, limitations such as link range, path loss, and turbulence lead to low power and, consequently, a low signal-to-noise ratio (SNR) at the receiver. In this article, we present the design of a smart transceiver for bidirectional communication. The system adapts the divergence angle of the optical beam from the transmitter based on the power of the signal received. This paper details the real-time data transmission process, where the transmitting station consists of a light fidelity (Li-Fi) transmitter with a 470 nm blue-light-emitting diode (LED) and a software-defined radio (SDR) for underwater optical communication. The receiving station is equipped with a Li-Fi receiver, which includes a photodetector with a wide field of view and an SDR. Furthermore, we use pulse position modulation (PPM), which demonstrates promising results for real-time transmission. A key innovation of this paper is the integration of the Li-Fi system with the SDR, while the system adapts dynamically using a servo motor and an Arduino microcontroller assembly. The experimental results show that this approach not only increases throughput but also enhances the robustness and efficiency of the system.

Schlagwörter

Stichwörter der Autor:innen

Li-Fibit error ratepowerpulse position modulationsoftware-defined radiounderwater visible light communication

Autor:innen und Institutionen

  • School of Electrical Engineering, Computing and Mathematical Sciences (EECMS), Curtin University, Kent Street, Bentley, WA 6102, Australia.

ORCID-Profile: Sana Rehman, Yue Rong, Peng Chen

Zitieren

APA

Rehman, S., Rong, Y., & Chen, P. (2025). Designing an Adaptive Underwater Visible Light Communication System. Sensors, 25(6), 1801. https://doi.org/10.3390/s25061801

Vancouver

Rehman S, Rong Y, Chen P. Designing an Adaptive Underwater Visible Light Communication System. Sensors. 2025;25(6):1801. doi:10.3390/s25061801

BibTeX
@article{Rehman2025,
  author = {Rehman, Sana and Rong, Yue and Chen, Peng},
  title = {Designing an Adaptive Underwater Visible Light Communication System},
  journal = {Sensors},
  year = {2025},
  volume = {25},
  number = {6},
  pages = {1801},
  doi = {10.3390/s25061801}
}
Kostenlos starten →