EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Design, Calibration, and Application of a Wide-Range Fiber Bragg Grating Strain Sensor

Gang Wang, Jiajian Wang, Jian Meng, Liang Ren iD, Xing Fu iD

Sensors · 15.02.2025 · 25 (4) · 1192

DOI: 10.3390/s25041192 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 15.02.2025. Verfasst von Gang Wang und 4 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of Offshore and Coastal Engineering, Dalian University of Technology, Dalian 116024, China. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 37 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

To address the issue of extra-large structural deformation or strain in infrastructures such as bridges, buildings, railroads, and pipelines during catastrophic events, this study proposes a wide-range fiber Bragg grating (FBG) strain sensor utilizing a snake spring desensitization mechanism to share large parts of the strains. Initially, the axial stiffness of the snake spring desensitization mechanism was derived using the strain energy method, which was applied for stiffness calculation, range determination, and parameter design of the entire structure, where the snake spring and the FBG strain sensor were connected in series. Then, the snake springs were fabricated using 3D printing technology and assembled with the FBG sensor to construct a wide-range strain sensor. The wide-range sensor was subsequently calibrated, achieving a strain range of 10,000 με and a linearity coefficient above 0.9995. Finally, the sensor was installed in a pipeline for testing, yielding favorable results. These results demonstrate that the proposed sensor exhibits a wide strain monitoring range and can be effectively used for real-time structural safety analysis by continuously monitoring localized large structure strains.

Schlagwörter

Stichwörter der Autor:innen

3D printing technologydesensitization mechanismextra-large strain monitoringwide-range fiber Bragg grating sensor

Autor:innen und Institutionen

  • State Key Laboratory of Offshore and Coastal Engineering, Dalian University of Technology, Dalian 116024, China.
  • China Petroleum Pipeline Engineering Co., Ltd., Langfang 065000, China.

ORCID-Profile: Liang Ren, Xing Fu

Zitieren

APA

Wang, G., Wang, J., Meng, J., Ren, L., & Fu, X. (2025). Design, Calibration, and Application of a Wide-Range Fiber Bragg Grating Strain Sensor. Sensors, 25(4), 1192. https://doi.org/10.3390/s25041192

Vancouver

Wang G, Wang J, Meng J, Ren L, Fu X. Design, Calibration, and Application of a Wide-Range Fiber Bragg Grating Strain Sensor. Sensors. 2025;25(4):1192. doi:10.3390/s25041192

BibTeX
@article{Wang2025,
  author = {Wang, Gang and Wang, Jiajian and Meng, Jian and Ren, Liang and Fu, Xing},
  title = {Design, Calibration, and Application of a Wide-Range Fiber Bragg Grating Strain Sensor},
  journal = {Sensors},
  year = {2025},
  volume = {25},
  number = {4},
  pages = {1192},
  doi = {10.3390/s25041192}
}
Kostenlos starten →