EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Industrial Robot Control System with a Predictive Maintenance Module Using IIoT Technology

Andrzej Wojtulewicz iD, Patryk Chaber iD

Sensors · 13.02.2025 · 25 (4) · 1154

DOI: 10.3390/s25041154 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 13.02.2025. Verfasst von Andrzej Wojtulewicz und 1 weiteren Autor:innen. Beteiligte Einrichtung: Institute of Control and Computation Engineering, Faculty of Electronics and Information Technology, Warsaw University of Technology, ul. Nowowiejska…. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 28 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Institute of Control and Computation Engineering, Faculty of Electronics and Information Technology, Warsaw University of Technology.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The article describes solutions in the field of diagnostics of a control system based on a CNC and the cooperation with an industrial robot. The industrial robot is controlled directly from the CNC. Data exchange between the CNC and the robot controller allows for collecting the most important process data from the robot. Then, calculations are performed in the PLC using a number of functions to obtain consumption indicators of individual robot components. The data were visualized on the HMI screens of the CNC. Additionally, a dedicated interface was prepared to share these data using the MQTT protocol for IIoT solutions. The entire solution was implemented and then deployed in a real station. The presented solution is an extension of the possibilities of operating an industrial robot by CNC towards diagnostics and early failure prevention.

Schlagwörter

Stichwörter der Autor:innen

CNCHP HMIIIoTMQTTcommunication protocolsdiagnosticsindustrial robotprediction

Autor:innen und Institutionen

  • Institute of Control and Computation Engineering, Faculty of Electronics and Information Technology, Warsaw University of Technology, ul. Nowowiejska 15/19, 00-665 Warsaw, Poland.

ORCID-Profile: Andrzej Wojtulewicz, Patryk Chaber

Förderung

  • Institute of Control and Computation Engineering, Faculty of Electronics and Information Technology, Warsaw University of Technology

Zitieren

APA

Wojtulewicz, A., & Chaber, P. (2025). Industrial Robot Control System with a Predictive Maintenance Module Using IIoT Technology. Sensors, 25(4), 1154. https://doi.org/10.3390/s25041154

Vancouver

Wojtulewicz A, Chaber P. Industrial Robot Control System with a Predictive Maintenance Module Using IIoT Technology. Sensors. 2025;25(4):1154. doi:10.3390/s25041154

BibTeX
@article{Wojtulewicz2025,
  author = {Wojtulewicz, Andrzej and Chaber, Patryk},
  title = {Industrial Robot Control System with a Predictive Maintenance Module Using IIoT Technology},
  journal = {Sensors},
  year = {2025},
  volume = {25},
  number = {4},
  pages = {1154},
  doi = {10.3390/s25041154}
}
Kostenlos starten →