EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Light-Activated Room Temperature Surface Acoustic Wave H2S Sensor Based on Bi2S3 Nanoribbons

Chong Li, Sami Ramadan, Hao Kan, Lina Wang

Sensors · 12.02.2025 · 25 (4) · 1122

DOI: 10.3390/s25041122 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 12.02.2025. Verfasst von Chong Li und 3 weiteren Autor:innen. Beteiligte Einrichtung: School of Electronic Engineering, Huainan Normal University, Huainan 232038, China. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 41 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Anhui Province College Student Innovation Training Program Project, Scientific Research Initiation Grant Project of Huainan Normal University.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The expansion of the Internet of Things (IoT) has rendered wireless passive, highly stable, and room-temperature gas sensors indispensable for sensor applications. In this work, a room-temperature surface acoustic wave (SAW) H2S sensor based on a thin film of nano-mesh woven with Bi2S3 nanoribbons was successfully designed and prepared. The impact of varying inorganic salts solution ligand substitution of long-chain organic ligands of Bi2S3 films on performance was assessed. Notably, the responses of the sensors following ligand substitution exhibited improvement to varying degrees. In particular, the Cu(NO3)2-treated sensor to 10 ppm H2S was 203% of that of the untreated sensor. Furthermore, the impact of visible light activation on sensor performance was assessed. The results show the sensor has a high sensitivity to H2S molecules under yellow light activation at room temperature, with excellent selectivity, fast response speed and low detection limit. The sensor exhibited a response to 10 ppm H2S under yellow light activation that was approximately equal ~ two times greater than the response observed in a dark environment. This work provides a novel approach to enhance the performance of room-temperature SAW H2S sensors.

Schlagwörter

Stichwörter der Autor:innen

Bi2S3H2Slight-activated sensornanoribbonssurface acoustic wave (SAW)

Autor:innen und Institutionen

  • School of Electronic Engineering, Huainan Normal University, Huainan 232038, China.
  • Department of Materials, Imperial College London, London SW7 2AZ, UK.
  • School of Information Science and Engineering, University of Jinan, Jinan 250022, China.

Förderung

  • Anhui Province College Student Innovation Training Program Project
  • Scientific Research Initiation Grant Project of Huainan Normal University

Zitieren

APA

Li, C., Ramadan, S., Kan, H., & Wang, L. (2025). Light-Activated Room Temperature Surface Acoustic Wave H2S Sensor Based on Bi2S3 Nanoribbons. Sensors, 25(4), 1122. https://doi.org/10.3390/s25041122

Vancouver

Li C, Ramadan S, Kan H, Wang L. Light-Activated Room Temperature Surface Acoustic Wave H2S Sensor Based on Bi2S3 Nanoribbons. Sensors. 2025;25(4):1122. doi:10.3390/s25041122

BibTeX
@article{Li2025,
  author = {Li, Chong and Ramadan, Sami and Kan, Hao and Wang, Lina},
  title = {Light-Activated Room Temperature Surface Acoustic Wave H2S Sensor Based on Bi2S3 Nanoribbons},
  journal = {Sensors},
  year = {2025},
  volume = {25},
  number = {4},
  pages = {1122},
  doi = {10.3390/s25041122}
}
Kostenlos starten →