EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A Diagnosis Method for Noise and Intermittent Faults in Analog Circuits Based on the Fusion of Multiscale Fuzzy Entropy Features and Amplitude Features

Junyou Shi, Yilei Hou iD, Zili Wang, Zhilin Yang iD, Zhenyang Lv

Sensors · 12.02.2025 · 25 (4) · 1090

DOI: 10.3390/s25041090 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 12.02.2025. Verfasst von Junyou Shi und 4 weiteren Autor:innen. Beteiligte Einrichtung: School of Reliability and Systems Engineering, Beihang University, Beijing 100191, China. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 33 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Key Scientific Research Projects of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Intermittent faults occur randomly, last for short durations, and ultimately lead to permanent failures, threatening the safety and stability of analog circuits. Additionally, these faults are often hard to differentiate from noise-induced anomalies, resulting in incorrect disassembly and complicating circuit maintenance. To address these challenges, we propose a novel fault diagnosis method. The method uses an adjustable sliding window to extract multiscale fuzzy entropy features, mitigating the impact of normal data on entropy calculations for intermittent faults. The coarse granulation strategy of sliding point by point is applied to avoid information loss in short time series. The raw signal is then segmented and transformed into four statistical features, which are fused into comprehensive amplitude features via a self-attention mechanism. This comprehensive feature better captures amplitude variations than individual statistical features. Finally, the two features are fed into a convolutional neural network for diagnosis. The method is applied to two typical analog circuits. Ablation studies confirmed its effectiveness. Although the proposed method does not have the lowest diagnostic cost and the fastest detection time, the differences with state-of-the-art methods are minimal, and the proposed method achieves higher classification accuracy. Taken together, these findings demonstrate the superiority of the proposed method.

Schlagwörter

Stichwörter der Autor:innen

amplitude featuresanalog circuitsintermittent fault diagnosismultiscale fuzzy entropynoise

Autor:innen und Institutionen

  • School of Reliability and Systems Engineering, Beihang University, Beijing 100191, China.

ORCID-Profile: Yilei Hou, Zhilin Yang

Förderung

  • National Key Scientific Research Projects of China

Zitieren

APA

Shi, J., Hou, Y., Wang, Z., Yang, Z., & Lv, Z. (2025). A Diagnosis Method for Noise and Intermittent Faults in Analog Circuits Based on the Fusion of Multiscale Fuzzy Entropy Features and Amplitude Features. Sensors, 25(4), 1090. https://doi.org/10.3390/s25041090

Vancouver

Shi J, Hou Y, Wang Z, Yang Z, Lv Z. A Diagnosis Method for Noise and Intermittent Faults in Analog Circuits Based on the Fusion of Multiscale Fuzzy Entropy Features and Amplitude Features. Sensors. 2025;25(4):1090. doi:10.3390/s25041090

BibTeX
@article{Shi2025,
  author = {Shi, Junyou and Hou, Yilei and Wang, Zili and Yang, Zhilin and Lv, Zhenyang},
  title = {A Diagnosis Method for Noise and Intermittent Faults in Analog Circuits Based on the Fusion of Multiscale Fuzzy Entropy Features and Amplitude Features},
  journal = {Sensors},
  year = {2025},
  volume = {25},
  number = {4},
  pages = {1090},
  doi = {10.3390/s25041090}
}
Kostenlos starten →