EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Dual-Band 802.11 RF Energy Harvesting Optimization for IoT Devices with Improved Patch Antenna Design and Impedance Matching

Ashraf Ali iD, Rama Eid, Digham Emad Manaseer, Hussein Khaled AbuJaber, Andrew Ware iD

Sensors · 10.02.2025 · 25 (4) · 1055

DOI: 10.3390/s25041055 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 10.02.2025. Verfasst von Ashraf Ali und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Electrical Engineering, Faculty of Engineering, The Hashemite University, Zarqa 13133, Jordan. Die Arbeit wurde bisher 14-mal zitiert (Crossref) und nennt 27 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This paper investigates the feasibility of harvesting Radio Frequency (RF) energy from the Wi-Fi frequency band to power low-power Internet-of-Things (IoT) devices. With the increasing prevalence of IoT applications and wireless sensor networks (WSNs), there is a critical need for sustainable energy sources that can extend the operational lifespan of these devices, particularly in remote locations, where access to reliable power supplies is limited. The paper describes the design, simulation, and fabrication of a dual-band antenna capable of operating at 2.4 GHz and 5 GHz, the frequencies used by Wi-Fi. The simulation and experimental results show that the proposed design is efficient based on the reflection coefficient. Using a high-frequency simulator, we developed two C-shaped and an F-shaped microstrip antenna design, optimized for impedance matching and efficient RF–DC conversion.The captured RF energy is converted into usable electrical power that can be directly utilized by low-power IoT devices or stored in batteries for later use. The paper introduces an efficient design for dual-band antennas to maximize the reception of Wi-Fi signals. It also explains the construction of an impedance-matching network to reduce signal reflection and improve power transfer efficiency. The results indicate that the proposed antennas can effectively harvest Wi-Fi energy, providing a sustainable power source for IoT devices. The practical implementation of this system offers a promising solution to the energy supply challenges faced by remote and low-power IoT applications, paving the way for more efficient and longer-lasting wireless sensor networks.

Schlagwörter

Stichwörter der Autor:innen

Internet of Things (IoT)Wi-Fi energy harvestingdual-band antennaimpedance matchingmicrostrip antennareflection coefficient

Autor:innen und Institutionen

  • Department of Electrical Engineering, Faculty of Engineering, The Hashemite University, Zarqa 13133, Jordan.
  • Faculty of Computing, Engineering and Sciences, University of South Wales, Pontypridd CF37 1DL, UK.

ORCID-Profile: Ashraf Ali, Andrew Ware

Zitieren

APA

Ali, A., Eid, R., Manaseer, D. E., AbuJaber, H. K., & Ware, A. (2025). Dual-Band 802.11 RF Energy Harvesting Optimization for IoT Devices with Improved Patch Antenna Design and Impedance Matching. Sensors, 25(4), 1055. https://doi.org/10.3390/s25041055

Vancouver

Ali A, Eid R, Manaseer DE, AbuJaber HK, Ware A. Dual-Band 802.11 RF Energy Harvesting Optimization for IoT Devices with Improved Patch Antenna Design and Impedance Matching. Sensors. 2025;25(4):1055. doi:10.3390/s25041055

BibTeX
@article{Ali2025,
  author = {Ali, Ashraf and Eid, Rama and Manaseer, Digham Emad and AbuJaber, Hussein Khaled and Ware, Andrew},
  title = {Dual-Band 802.11 RF Energy Harvesting Optimization for IoT Devices with Improved Patch Antenna Design and Impedance Matching},
  journal = {Sensors},
  year = {2025},
  volume = {25},
  number = {4},
  pages = {1055},
  doi = {10.3390/s25041055}
}
Kostenlos starten →