EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

High-Power Characteristics of Piezoelectric Transducers Based on [011] Poled Relaxor-PT Single Crystals

Soohyun Lim, Yub Je iD, Min-Jung Sim iD, Hwang-Pill Kim, Yohan Cho, Yoonsang Jeong, Hee-Seon Seo

Sensors · 04.02.2025 · 25 (3) · 936

DOI: 10.3390/s25030936 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 04.02.2025. Verfasst von Soohyun Lim und 6 weiteren Autor:innen. Beteiligte Einrichtung: Agency for Defense Development, Changwon 51678, Republic of Korea. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Agency for Defense Development in Korea.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

[011] poled relaxor-PT single crystals provide superior piezoelectric constants and electromechanical coupling factors in the 32 crystal directions, and also exhibit high electrical stability under compressive stresses and temperature changes. In particular, Mn-doped Pb(In1/2Nb1/2)O3-Pb(Mg1/3Nb2/3)O3-PbTiO3 (Mn:PIN-PMN-PT) single crystals show a superior coercive field (EC ≥ 8.0 kV/cm) and mechanical quality factor (Qm ≥ 1030), making them suitable for high-power transducers. The high-power characteristics of [011] poled single crystals have been verified from a material perspective; thus, further investigation is required from a transducer perspective. In this study, the high-power characteristics of piezoelectric transducers based on [011] poled PIN-PMN-PT and [011] poled Mn:PIN-PMN-PT single crystals were investigated. To analyze the driving limits of the single crystals, the polarization–electric field (P–E) curves, as a function of the driving electric field, were measured. The results showed that [011] poled Mn:PIN-PMN-PT single crystals demonstrate lower energy loss and THD (Total Harmonic Distortion), directly relating to the driving efficiency and linearity of the transducer. Additionally, [011] poled Mn:PIN-PMN-PT crystals provide excellent stability under the compressive stress and temperature changes. To analyze the high-power characteristics of [011] poled single-crystal transducers, two types of barrel-stave transducers, based on [011] poled PIN-PMN-PT and [011] poled Mn:PIN-PMN-PT, were designed and fabricated. The changes in the impedance and transmitting voltage response with respect to the driving electric fields were measured, and the energy loss and THD of the transducers with respect to the driving electric fields were examined to assess the driving limit of the [011] poled single-crystal transducer. The high-power characteristic tests confirmed the stability of [011] poled Mn:PIN-PMN-PT single crystals and verified their potential for high-power transducer applications.

Schlagwörter

Stichwörter der Autor:innen

Mn:PIN-PMN-PT[011] poled single crystalsferroelectricsflextensional transducerhigh-power characteristicshigh-power transducerspiezoelectricsrelaxor-PbTiO3underwater transducer

Autor:innen und Institutionen

  • Agency for Defense Development, Changwon 51678, Republic of Korea.
  • iBULe Photonics Co., Ltd., Incheon 21999, Republic of Korea.

ORCID-Profile: Yub Je, Min-Jung Sim

Förderung

  • Agency for Defense Development in Korea

Zitieren

APA

Lim, S., Je, Y., Sim, M. J., Kim, H. P., Cho, Y., Jeong, Y., & Seo, H. S. (2025). High-Power Characteristics of Piezoelectric Transducers Based on [011] Poled Relaxor-PT Single Crystals. Sensors, 25(3), 936. https://doi.org/10.3390/s25030936

Vancouver

Lim S, Je Y, Sim MJ, Kim HP, Cho Y, Jeong Y, et al. High-Power Characteristics of Piezoelectric Transducers Based on [011] Poled Relaxor-PT Single Crystals. Sensors. 2025;25(3):936. doi:10.3390/s25030936

BibTeX
@article{Lim2025,
  author = {Lim, Soohyun and Je, Yub and Sim, Min-Jung and Kim, Hwang-Pill and Cho, Yohan and Jeong, Yoonsang and Seo, Hee-Seon},
  title = {High-Power Characteristics of Piezoelectric Transducers Based on [011] Poled Relaxor-PT Single Crystals},
  journal = {Sensors},
  year = {2025},
  volume = {25},
  number = {3},
  pages = {936},
  doi = {10.3390/s25030936}
}
Kostenlos starten →