EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Acoustic Sensing Fiber Coupled with Highly Magnetostrictive Ribbon for Small-Scale Magnetic-Field Detection

Zach Dejneka iD, Daniel Homa iD, Logan Theis, Anbo Wang, Gary Pickrell

Sensors · 30.01.2025 · 25 (3) · 841

DOI: 10.3390/s25030841 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 30.01.2025. Verfasst von Zach Dejneka und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Materials Science and Engineering, Virginia Tech, Blacksburg, VA 24061, USA. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 20 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: U.S. Department of Energy, Department of Energy.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Fiber-optic sensing has shown promising development for use in detecting magnetic fields for downhole and biomedical applications. Coupling existing fiber-based strain sensors with highly magnetostrictive materials allows for a new method of magnetic characterization capable of distributed and high-sensitivity field measurements. This study investigates the strain response of the highly magnetostrictive alloys Metglas® 2605SC and Vitrovac® 7600 T70 using Fiber Bragg Grating (FBG) acoustic sensors and an applied AC magnetic field. Sentek Instrument’s picoDAS interrogated the distributed FBG sensors set atop a ribbon of magnetostrictive material, and the corresponding strain response transferred to the fiber was analyzed. Using the Vitrovac® ribbon, a minimal detectable field amplitude of 60 nT was achieved. Using Metglas®, an even better sensitivity was demonstrated, where detected field amplitudes as low as 3 nT were measured via the strain response imparted to the FBG sensor. Distributed FBG sensors are readily available commercially, easily integrated into existing interrogation systems, and require no bonding to the magnetostrictive material for field detection. The simple sensor configuration with nanotesla-level sensitivity lends itself as a promising means of magnetic characterization and demonstrates the potential of fiber-optic acoustic sensors for distributed measurements.

Schlagwörter

Stichwörter der Autor:innen

distributed acoustic sensorsmagnetic-field sensorsmagnetismmagnetostrictionoptic sensors

Autor:innen und Institutionen

  • Department of Materials Science and Engineering, Virginia Tech, Blacksburg, VA 24061, USA.
  • Center for Photonics Technology, Bradley Department of Electrical and Computer Engineering, Virginia Tech, Blacksburg, VA 24061, USA.

ORCID-Profile: Zach Dejneka, Daniel Homa

Förderung

  • U.S. Department of Energy
  • Department of Energy

Zitieren

APA

Dejneka, Z., Homa, D., Theis, L., Wang, A., & Pickrell, G. (2025). Acoustic Sensing Fiber Coupled with Highly Magnetostrictive Ribbon for Small-Scale Magnetic-Field Detection. Sensors, 25(3), 841. https://doi.org/10.3390/s25030841

Vancouver

Dejneka Z, Homa D, Theis L, Wang A, Pickrell G. Acoustic Sensing Fiber Coupled with Highly Magnetostrictive Ribbon for Small-Scale Magnetic-Field Detection. Sensors. 2025;25(3):841. doi:10.3390/s25030841

BibTeX
@article{Dejneka2025,
  author = {Dejneka, Zach and Homa, Daniel and Theis, Logan and Wang, Anbo and Pickrell, Gary},
  title = {Acoustic Sensing Fiber Coupled with Highly Magnetostrictive Ribbon for Small-Scale Magnetic-Field Detection},
  journal = {Sensors},
  year = {2025},
  volume = {25},
  number = {3},
  pages = {841},
  doi = {10.3390/s25030841}
}
Kostenlos starten →