EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Multijoint Continuous Motion Estimation for Human Lower Limb Based on Surface Electromyography

Yonglin Han iD, Qing Tao iD, Xiaodong Zhang

Sensors · 2025

DOI: 10.3390/s25030719 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, 2025. Verfasst von Yonglin Han und 2 weiteren Autor:innen. Beteiligte Einrichtung: School of Mechanical Engineering, Xinjiang University, Urumqi 830047, China. Hauptthemen laut MEDLINE: Electromyography, Lower Extremity. Die Arbeit wurde bisher 21-mal zitiert (Crossref) und nennt 33 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Tianshan Talent Training Program, The Excellent Doctoral Graduate Innovation Program.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The estimation of multijoint angles is of great significance in the fields of lower limb rehabilitation, motion control, and exoskeleton robotics. Accurate joint angle estimation helps assess joint function, assist in rehabilitation training, and optimize robotic control strategies. However, estimating multijoint angles in different movement patterns, such as walking, obstacle crossing, squatting, and knee flexion–extension, using surface electromyography (sEMG) signals remains a challenge. In this study, a model is proposed for the continuous motion estimation of multijoint angles in the lower limb (CB-TCN: temporal convolutional network + convolutional block attention module + temporal convolutional network). The model integrates temporal convolutional networks (TCNs) with convolutional block attention modules (CBAMs) to enhance feature extraction and improve prediction accuracy. The model effectively captures temporal features in lower limb movements, while enhancing attention to key features through the attention mechanism of CBAM. To enhance the model’s generalization ability, this study adopts a sliding window data augmentation method to expand the training samples and improve the model’s adaptability to different movement patterns. Through experimental validation on 8 subjects across four typical lower limb movements, walking, obstacle crossing, squatting, and knee flexion–extension, the results show that the CB-TCN model outperforms traditional models in terms of accuracy and robustness. Specifically, the model achieved R2 values of up to 0.9718, RMSE as low as 1.2648°, and NRMSE values as low as 0.05234 for knee angle prediction during walking. These findings indicate that the model combining TCN and CBAM has significant advantages in predicting lower limb joint angles. The proposed approach shows great promise for enhancing lower limb rehabilitation and motion analysis.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

ElectromyographyLower ExtremityHumansWalkingAdultMaleMovementKnee JointMotionYoung AdultFemaleNeural Networks, ComputerAlgorithms

Stichwörter der Autor:innen

CBAMTCNdifferent movement patternsmultijoint angle estimationsEMG

Autor:innen und Institutionen

  • School of Mechanical Engineering, Xinjiang University, Urumqi 830047, China.
  • School of Mechanical Engineering, Xi'an Jiaotong University, Xi'an 710049, China.

ORCID-Profile: Yonglin Han, Qing Tao

Förderung

  • National Natural Science Foundation of China
  • Tianshan Talent Training Program
  • The Excellent Doctoral Graduate Innovation Program

Zitieren

APA

Han, Y., Tao, Q., & Zhang, X. (2025). Multijoint Continuous Motion Estimation for Human Lower Limb Based on Surface Electromyography. Sensors. https://doi.org/10.3390/s25030719

Vancouver

Han Y, Tao Q, Zhang X. Multijoint Continuous Motion Estimation for Human Lower Limb Based on Surface Electromyography. Sensors. 2025. doi:10.3390/s25030719

BibTeX
@article{Han2025,
  author = {Han, Yonglin and Tao, Qing and Zhang, Xiaodong},
  title = {Multijoint Continuous Motion Estimation for Human Lower Limb Based on Surface Electromyography},
  journal = {Sensors},
  year = {2025},
  doi = {10.3390/s25030719}
}
Kostenlos starten →